Quick Help! -->
 
You have no items in your shopping cart.
Close
Filters

ROBERT SORBY SET WOODTURNING CHISELS PIECE 6 BEGINNERS

ROBERT SORBY SET WOODTURNING CHISELS PIECE 6 BEGINNERS

R8 480,00 incl VAT
Set of 6 standard sized tools for beginners. Suitable for both bowl and spindle turning. All 350 mm long.
- +
Manufacturer: Robert Sorby
Availability: In stock
SKU: TA-67HS
Manufacturer part number: 67HS

Robert Sorby Beginners Set consists of the following:

  • Roughing Gouge 19mm (843H)
  • Fingernail Spindle Gouge 10mm( 840H)
  • Standard Bowl Gouge 10mm(842LH)
  • Oval Skew 19mm( 809H)
  • Standard Parting Tool3mm ( 830H)
  • Round Nose Scraper 13 mm(820H)



Write your own review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Robert Sorby Spiralling System South Africa

ROBERT SORBY SPIRALLING SYSTEM

TA-B330
Creating barley twists, spirals and flutes has always represented a problem for the woodturner. The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner’s imagination to run wild as he enters a new field of decoration. Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice - but still comes with instructions and ideas on further use. The built-in rest allows the work to be approached at a variety of angles - graduations on the rest ensure repeatability. The degree of off-set determines the pitch of the spiral. Another variation is introduced with the addition of three different cutters which can also be used for texturing. From these the turner can either produce amongst other works fine spirals on the stem of a delicate goblet, chequered designs, rope effect twists, heavy patterns on boxes, spindles or candlesticks as well as around the base. The 330H and 330S come with four cutters whilst the 320H and 320S are the same tool but with a single cutter (see table). It is also possible to up-grade a texturing tool to create spirals by the purchase of the tool rest (360) and an appropriate cutter. The Spiralling and Texturing tools are shown to full effect in the Robert Sorby Focus on Decorative Techniques DVD (RSDVDDT). If your requirement is for finer spirals we also have a micro spiralling tool (ref 370A). Also available unhandled for the Sovereign System.
R5 160,00 incl VAT
Robert Sorby Scraper Bowl Finishing Inboard South Africa

ROBERT SORBY SCRAPER BOWL FINISHING INBOARD

TA-8008
Designed for finishing large bowls when working inboard (curve on left)
R2 885,00 incl VAT
Robert Sorby Full Round Nose Scraper 1 1/2" (38mm) South Africa

ROBERT SORBY FULL ROUND SCRAPER 1 1/2" (38MM)

TA8004L
Designed for finishing when working in the outboard mode of the lathe.
R1 890,00 incl VAT
Robert Sorby Cutter for Hollowing Tool South Africa

ROBERT SORBY CUTTER FOR HOLLOWING TOOL

TA-851C
The Robert Sorby General Purpose Cutter is a small cutter designed for the removal of waste material when using the smaller Swan Neck and Swivel Tip probe tools. Ideal for end grain use on shallower depth projects. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Related Products: This cutter is designed for use with the following tools: Swan Neck Hollowing Tools (851H, 855H) Swivel Tip Probe (8801H
R234,36 incl VAT
Robert Sorby Hollowing Tool South Africa

ROBERT SORBY HOLLOWING TOOL 14" HANDELED

TA-B851
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber. Where space permits the larger tool (851H) provides a heavier section and has the benefit of a replaceable swivel cutting tip. This can be used in conjunction with the wall thickness gauge (854) to create consistent side wall thickness.
R1 130,00 incl VAT
JET 1220-LATHE EXT. BED SOUTH AFRICA

JET 1220-LATHE EXT. BED

TA70837
Cast iron bed extension that bolts on to the JET 1220 lathe.
Call for pricing