TOOL ACCESSORIES

Adaptors that can be used with cordless drills and sockets

An adaptor that can be used for mounting sockets for use with a hex screw

This is a Hex adaptor to connect the TCT hollow core bit to your rotary hammer drill.

This is an SDS Plus adaptor to connect the TCT hollow core bit to your rotary hammer drill.

This is a Hex adaptor to connect the Dry Cut Diamond Core Drill to your portable drill. Make sure the threads are the same as the Dry Cut Diamond Core Drill - M22 or M16.

SDS adaptor can be used on Electric or Cordless drills

This is an SDS Max adaptor to connect the TCT hollow core bit to your rotary hammer drill.

This is an SDS Max adaptor to connect the TCT hollow core bit to your rotary hammer drill.

This is an SDS Max adaptor to connect the TCT hollow core bit to your rotary hammer drill.

used for tightening and loosening hex screws and bolts

Allen key designed to tighten or loosen Allen key screws

used for Allen key screws

Used for Allen key screws

Allen Key used for Allen key screws

used on Allen Key screws

Allen keys are used for Allen key screws

Allen keys are used for Allen key screws

Allen keys are used for Aleen key screws.

Allen key is used for Allen key screws

The case used to hold valuable tools

Pad is used for sanding metal and wood for a smooth finish

This pad can be used for sanding metal or wood for a smooth finish

Used to hold tools needed for the job at hand

Apron used to carry tools

A flap disc is an abrasive tool made to fit onto an angle grinder to grind and finish in one operation.

Pozidrive bit can be used on most Phillip screws

Hose clamps are used to secure hose or flexible tubing to a fitting. The clamp is placed around the hose, directly over the fitting. As the clamp is tightened, it clamps the inner diameter of the hose to the fitting or barb.

The diamond polishing pads are used to polish stone surfaces. The polishing pads can be used with or without water, but will last longer when used with water.

Spare battery.

Compatible with all belt sanders that require sanding belts 65mm wide and 410mm long. High quality Aluminium Oxide belts for use with wood and metal.

Compatible with all belt sanders that require sanding belts 65mm wide and 410mm long. High quality Aluminium Oxide belts for use with wood and metal.

Compatible with all belt sanders that require sanding belts 65mm wide and 410mm long. High quality Aluminium Oxide belts for use with wood and metal.

Compatible with machines using curved velcro sanding pads Manufactured from high-quality Aluminium Oxide abrasive for use with wood and metal.

The diamond core bit is used to drill holes in: •Ceramic tiles •Marble •Grade 5 porcelain (hardest) •Granite •Glass •Slate The diamond core cuts faster, smoother, and lasts longer than any other core drills The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C. There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill but in the lowest gear setting. No hammer action is used.

This is a drill guide designed to be used with diamond core bits. The drill guide is held in position with a suction cup. It works very well when drilling into tiles. The underside of the drill guide is covered with foam to hold water when drilling on flat surfaces.

This is a drill guide designed to be used with diamond core bits. Compatible sizes for the drill guide: Ø4-70mm. The drill guide is held in position with two suction cups. It works very well when drilling into tiles. The underside of the drill guide is covered with foam to hold water when drilling on flat surfaces

The brush can be used to clean nails and screws

The brush can be used on braai grids and bbq grids

The brushes can be used to clean tubes, etc.

The brush can be used to clean tubes, etc.

The brush can be used to clean nails and screws, etc, on a bench grinder.

The brush can be used to clean nails and screws, etc.

This brush is used to clean nails and screws, etc.

This brush is used to clean nails and screws, etc.

This brush is used to clean nails and screws, etc.

This brush is used to clean nails and screws, etc.

Wire brushes are used to clean rusted parts

Wire brushes are used to clean rusted parts