All Categories

    Table Saw

    View as Grid List
    Sort by
    Display per page

    Jet Construction Saw Table Extension

    R200,00 incl VAT R1 540,00 incl VAT
    Made from zink plated sheet metal 500 x 800 mm

    Toolmate Thin Rip Table Saw Jig

    R550,00 incl VAT
    The thin rip table saw jig makes repetitive ripping of thin strips safer and easier than ever before. Because the strips are cut on the left-hand side of the blade, there is no burning, binding, or kickback. Made from heavy-duty aluminum extrusions, the jig locks securely in any 3/4" wide by 3/8" deep miter gauge slot and a built-in scale helps you make fine adjustments. The ball bearing holds the stock firmly against the fence, allows smooth feeding, and makes repositioning the fence a simple operation.

    Toolmate Prcision Mitre Gauge & Fence

    Call for pricing
    Table Saw Fence and Miter Gauge for Table Saw The Miter Gauge with Fence improves safety and accuracy when cutting or sanding and makes it easy to cut perfect mitres quickly. Includes a flip stop for repeated cutting lengths. You can adjust the flip stop to the entire length of the fence, and you can be flipped up and out of the way when not in use. The solid steel protractor head features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°, both left and right. 13 pre-set common angles in total. A pin stop adjustment knob allows for easy adjustments to the most common angles used by simply pulling the spring loaded knob up and sliding the miter head into the correct preset hole. The bar is 320mm long with a removable locking washer making it usable with any standard 19 x 9.5mm (3/4" x 3/8") track or similar sized T-slot. Three spring loaded ball bearings keep the bar snug in the track; the fence runs true without side-play.

    Toolmate Taper Jig For Table Saw

    R470,00 incl VAT
    Cut accurate tapers easily and quickly. Adjust between 0-15 degrees or 3" per foot on a graduated scale. Suitable for left or right handed use. Sturdy extended aluminum construction. Gap can be varied according to size of wood.

    Toolmate Hold Down Board

    R70,00 incl VAT
    When pressure is needed in a small position, a bow board is required. This simple design gets into spaces too small for feather boards.


    R125,00 incl VAT
    False fences have never been so easy to hold. Just drill a 7/16" hole into the top of the false fence. Drop the 3/8" fence clamp into place and tighten. You'll never damage you original fence face again.

    Freud Panel Saw Blade 300 X 30 X 72T

    R2 570,00 incl VAT
    Circular saw blade for solid wood. Tico Carbide: A specially formulated, highly compact Titanium Cobalt Carbide, engineered and manufactured br Freuad. It provides a sharper edge and flawless finish with a dramatically longer cutting life. Perma-SHIELD Coating: A non-stick coating formylation that withstands the toughest applications. It provides thermal insulation, protects from corrosion and elminates resin build-up, reducing downtime for cleaning.

    Freud ADJ Scorer 120 X 2.8-3.6 X 22T

    R1 350,00 incl VAT
    Freud is one of the few manufacturers of woodworking tools in the world that produces its own Micrograin Carbide for each tool application. ATB tooth 5° with positive cutting angle. Scoring sawblades for cutting coated panels, on sizing machines. Thickness adjustment controlled by the machines, no spacers required. Adjustable kerf Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner Ideal For: To score the coating on bilaminated panels.

    Freud Saw Blade 190 X 16MM X 24T

    Call for pricing
    Ideal for processing hard wood, soft wood and wood materials with plunge and hand circular saws.

    Freud Saw Blade 235 X 30MM X 24T

    Call for pricing
    Freud Saw Blade 235 X 30MM X 24T

    Toolmate Universal Mobile Base 1200LBS Capacity

    R3 150,00 incl VAT

    Toolmate Universal Mobile Base 400Lbs Capacity

    R1 790,00 incl VAT

    Milescraft Feather Board

    R440,00 incl VAT
    Feather Board for Routers and Table Saws features a unique pre-load design that allows you to set the appropriate tension between the workpiece and the fence of the power tool.

    Milescraft D/T Double Feather Board

    R871,50 incl VAT
    The Milescraft D/T Feather Board has maximum holding pressure created by unique split rail construction. Pre-load tension design maintains consistent pressure across the face of the feather board. Dual slide motion and S-style knobs provide quick, easy, and proper installation and prevent over-tightening damage to components. High visibility yellow makes units easy to find in busy shops.

    Milescraft Grabber Pro

    R1 076,00 incl VAT
    Grabber PRO is the ultimate adjustable push block. Ideal for use on table saws, router tables, jointers, and even band saws

    Toolmate Metric & Inch Height Gauge

    R750,00 incl VAT
    Metric & Inch Step Depth Gauge for Router and Table Saw, Aluminum Height Gauge Measuring Tool Ruler for Setting Up Blade Height.

    Toolmate Multi-Purpose Feather Board Set

    R495,00 incl VAT
    This feather board is a professional woodworking tool that can be used for engraving machines, table saws, band saws, etc You can better control the direction of the wood to prevent uneven cutting our feather board is not only light in weight but also very wear-resistant The feather board kit is equipped with (two pieces of feather board, four plastic sliders, two thick pads, four thin pads, four M6 lock nuts, two M6-70 T-screws, two M6-70 white lock screws, four M6-40 T-screws, four M6-40 white lock screws )

    Toolmate Miter Gauge Fence For Table saw 450mm

    R2 450,00 incl VAT
    Miter Gauge featuring 27 angle stops for precise incremental control. Large grip for comfort and strength. Tip-resistant washer to keep gauge steady when extended over work surface. The Miter Gauge is with standard miter bar dimensions 3/8" by 3/4" (approximately 9.5mm by 19mm) and 450mm long. It can be used on most table saws and router tables with standard slots. Fit your table saw, band saw, router table, disk sander, or belt sander like a glove that has a 3/8 x 3/4 inch slot.

    ToolmateRoll And Ball Stand MRS1

    Call for pricing
    ToolmateRoll And Ball Stand MRS1

    Table Saw

    Filter by:

    Clear All
    Min: R69,00 Max: R3 150,00
    R69 R3150