Close
Filters

ROBERT SORBY 12 PIECE MICRO CARVING SET

ROBERT SORBY 12 PIECE MICRO CARVING SET

R5 850,00 incl VAT
Robert Sorby Micro Carving Set of 12 consists of full range of 12 carving tools is available in a polished wooden case. When not in use the tools are ‘topped and tailed’ for carrying. During use, the case makes a very useful free-standing tool cabinet. The provision of additional slots in each of the two brass hanging rails allows the tools to be safely suspended and easily accessible.
- +
Manufacturer: Robert Sorby
Availability: In stock
SKU: TA-P512
Manufacturer part number: 512

Description:

Robert Sorby 12 piece Micro Carving Set consists of the following:

  • Straight Gouge 5/32" (4mm)
  • Dog Leg Chisel 3/16" (5mm)
  • Straight Gouge 3/16" (5mm)
  • Straight Gouge 1/16" (2mm)
  • Straight Gouge 3/16" (5mm)
  • Veiner 1/16" (1.5mm)
  • Bent Gouge 3/16" (5mm)
  • V Parting Tool 1/8" (3mm)
  • Square Chisel 3/16" (5mm)
  • Bent Gouge 1/8" (3mm)
  • Skew Chisel 5/32" (4mm)
  • Straight Gouge 1/8" (3mm)
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
JET JSS-16 BENCH TOP VARIABLE SPEED SCROLL SAW SOUTH AFRICA

Jet JSS-16 Bench Top Variable Speed Scroll Saw

WMJSS16
The JET Electric Scroll Saw comes equipped with a powerful commutator DC motor with a variable regulation of speed (550-1600 / min). That is why it can handle a wide range of materials up to 50 mm thick. The dust extraction outlet is 35 mm. The generously large table (410 x 254 mm) has a maximum width of cut 510 mm and may be tilted to up to 45°. The saw comes equipped with a pin clamping of saws. The release control wheel allows for a quick and simple swap. The ventilator keeps your workspace clean and well visible. The heavy cast-iron base offers stability and minimizes vibration.
Call for pricing
Robert Sorby Hollowing Tool South Africa

ROBERT SORBY HOLLOWING TOOL 14" HANDELED

TA-B851
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber. Where space permits the larger tool (851H) provides a heavier section and has the benefit of a replaceable swivel cutting tip. This can be used in conjunction with the wall thickness gauge (854) to create consistent side wall thickness.
R1 130,00 incl VAT
Robert Sorby Cutter for Hollowing Tool South Africa

ROBERT SORBY CUTTER FOR HOLLOWING TOOL

TA-851C
The Robert Sorby General Purpose Cutter is a small cutter designed for the removal of waste material when using the smaller Swan Neck and Swivel Tip probe tools. Ideal for end grain use on shallower depth projects. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Related Products: This cutter is designed for use with the following tools: Swan Neck Hollowing Tools (851H, 855H) Swivel Tip Probe (8801H
R234,36 incl VAT
Robert Sorby Full Round Nose Scraper 1 1/2" (38mm) South Africa

ROBERT SORBY FULL ROUND SCRAPER 1 1/2" (38MM)

TA8004L
Designed for finishing when working in the outboard mode of the lathe.
R1 890,00 incl VAT
Robert Sorby Scraper Bowl Finishing Inboard South Africa

ROBERT SORBY SCRAPER BOWL FINISHING INBOARD

TA-8008
Designed for finishing large bowls when working inboard (curve on left)
R2 885,00 incl VAT
Robert Sorby Spiralling System South Africa

ROBERT SORBY SPIRALLING SYSTEM

TA-B330
Creating barley twists, spirals and flutes has always represented a problem for the woodturner. The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner’s imagination to run wild as he enters a new field of decoration. Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice - but still comes with instructions and ideas on further use. The built-in rest allows the work to be approached at a variety of angles - graduations on the rest ensure repeatability. The degree of off-set determines the pitch of the spiral. Another variation is introduced with the addition of three different cutters which can also be used for texturing. From these the turner can either produce amongst other works fine spirals on the stem of a delicate goblet, chequered designs, rope effect twists, heavy patterns on boxes, spindles or candlesticks as well as around the base. The 330H and 330S come with four cutters whilst the 320H and 320S are the same tool but with a single cutter (see table). It is also possible to up-grade a texturing tool to create spirals by the purchase of the tool rest (360) and an appropriate cutter. The Spiralling and Texturing tools are shown to full effect in the Robert Sorby Focus on Decorative Techniques DVD (RSDVDDT). If your requirement is for finer spirals we also have a micro spiralling tool (ref 370A). Also available unhandled for the Sovereign System.
R5 160,00 incl VAT