Close
Filters

ROBERT SORBY RS2000 DEEP HOLLOWING SYSTEM COMPLETE KIT

ROBERT SORBY RS2000 DEEP HOLLOWING SYSTEM COMPLETE KIT

Temp out of stock : R7 200,00 incl VAT
The RS2000 System is a tried and trusted method of deep vessel hollowing. This flexible system can be used in a number of modes. Firstly, it is a very safe and effective means of hollowing deep vessels through narrow openings. At the same time it can be used for coning - producing a series of bowls from the same blank with a minimum of waste wood. This same method enables picture frames and other large rings to be made. Included in the complete system is a chattertool assembly which enhances end grain by creating a myriad of different decorative effects. The RS2000 is available as a complete system (RS2000) with twenty components as indicated below in a wooden case or as a basic system (RS2001) which is identical to the complete system except for the elimination of the chattertool components. Alternatively components may be purchased individually to suit the turner’s requirements. The RS2000 is supplied with a comprehensive eight-page instructional manual full of useful guidance and illustrations.
Manufacturer: Robert Sorby
Availability: Out of stock
SKU: TA-2000
Manufacturer part number: RS2000

Includes:

  • Main Handle RS 202
  • Side Handle RS 203
  • Collar for Side Handle RS 203C
  • Stud for Side Handle RS 203S
  • Extension Shank RS 204
  • TCT Slicer RS 205
  • Reversible Hooker RS210
  • Swivel Tip Complete RS 211
  • Hollowing Tip RS 211C
  • Hollowing Tip RS 212C
  • Dual Purpose Shank RS 215
  • Collar for RS215 RS 215C
  • Chattertool Cutter Square and Pointed RS 220
  • Domed / Hollow Chattertool Cutter RS221
  • HSS Scraper Blade RS 222
  • Allen Key RS 223
  • Cap Screw RS 223S
  • Diamond Sharpening File RS 224
  • Tee Knob RS 225



Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Robert Sorby Calipers Vessel 10" South Africa

ROBERT SORBY CALIPERS VESSEL 10"

TA-9710
These vessel callipers are designed for internal and thin-wall dimensioning. The straight arm is especially useful for accessing narrow vessels. Sizes can be read at either end. Available in 2½", 5" and 10" models.
R610,00 incl VAT
Robert Sorby Pewter Discs 3" pack of 5 South Africa

ROBERT SORBY PEWTER DISCS 3" PACK OF 5

TAC720P
Robert Sorby Pewter Discs 3" are used for decorative purposes.
R195,00 incl VAT
Nova Insert Chuck 3/4" 16TPI South Africa

NOVA INSERT CHUCK I9NS - 3/4 16TPI 6MM REGISTER

WA-I9NS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT
Nova Chuck G3 M33 Version South Africa

NOVA CHUCK G3 M33 VERSION

WA48201
Recommended for power workholding on lathes up to 400mm/14” diameter swing. •Up to 350mm/14″ diameter bowls using 50mm/2” Jaws (supplied with chuck) •Up to 50mm/2″ length spigots (using 50mm/2” Jaws (supplied with chuck) •Full Packaged Weight (Std) 1.4kgs/3.1lbs. THIS G3 CHUCK IS NOT THE ”INSERT VERSION” BUT HAS AN M33X3.5 THREAD MACHINED IN THE BODY. IT WILL FIT DIRECTLY ON THE HEADSTOCK OF LATHES WITH A SIMILAR THREAD.
R3 055,00 incl VAT
Robert Sorby Swivel Tip RS2000 Set South Africa

ROBERT SORBY SWIVEL TIP RS2000 SET

TA-RS21
Swivel Tip RS2000 Set comprises the swivel clamp that holds the tip firmly in place. Includes a Round End Swivel Tip. This cutter curved cutting edge is the perfect tool for providing a gentle sweeping curve for example on the bottom of vases.
R580,00 incl VAT