Close
Filters

NOVA INSERT CHUCK I9NS - 3/4 16TPI 6MM REGISTER

NOVA INSERT CHUCK I9NS - 3/4 16TPI 6MM REGISTER

R395,00 incl VAT
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
- +
Manufacturer: Nova
Availability: In stock
SKU: WA-I9NS
Manufacturer part number: I9NS
  • Adapts any NOVA chuck to almost any lathe spindle at low cost.
  • The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system to ensure maximum adaptability and flexibility for the user.

HOW DOES THE INSERT SYSTEM WORK?

The insert fits into the back of the chuck and onto your lathe headstock spindle. We have the largest range of inserts to fit many different popular lathe models.

The inserts are threaded both inside and out. The outside thread is made to fit into the NOVA Chucks. The inside thread comes in a variety of sizes, which one you need will depend on what lathe you have.

See the insert thread listing below for more details. If you are not sure what lathe thread you have, see our FAQ on how you can identify this thread in our support page.

Refer to the list of insert/adaptors that we manufacture. Check with us if your lathe is not listed, we update our inserts from time to time.
Some thread sizes we direct thread into the chuck body – as such, these do not require insert/adaptors. A directly threaded chuck body cannot be altered to an insert type body or another thread size once threaded, so it pays to be sure that your lathe thread size is not covered by the insert/adaptors first!

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Nova Chuck Supernova 2 Insert Version South Africa

NOVA CHUCK SUPERNOVA 2 INSERT VERSION

WA23055
Suitable for a wide variety of lathes with up to 20″ swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2″ Jaws come standard. Powerful patented Tuff Lock gearing with precise, hardened action. Delivers incredibly smooth strength for a solid, vibration free performance. You’ll find yourself turning longer, more delicate stems. Large, uneven and rough work that you couldn’t handle before can be turned with greater security. Takes the same accessory range as other NOVA chucks. Insert Type Chuck, requires additional insert adaptor to fit to lathe. The SuperNOVA2 also comes in a direct thread suitable for EU market, M33x3.5 • Powerful and fast Tuff Lock geared action • Unique tilt away T-bar handle for easy and convenient access • Composite indexing backing plate reinforced with stranded glass fibers for extra strength • Fits full range of NOVA chuck accessories • Special NOVA wood turning profile on jaws to cut into and grip wood fibers firmly • Precision machined from solid steel • 4-jaws lock down solidly THIS SUPANOVA 2(COMPLETE) CHUCK IS THE “INSERT VERSION”. PLEASE ENSURE THAT YOU SELECT THE CORRECT INSERT THAT MATCH THE THREAD OF YOUR PARTICULAR LATHE.
R3 950,00 incl VAT
Robert Sorby RS2000 Deep Hollowing System South Africa

ROBERT SORBY RS2000 DEEP HOLLOWING SYSTEM COMPLETE KIT

TA-2000
The RS2000 System is a tried and trusted method of deep vessel hollowing. This flexible system can be used in a number of modes. Firstly, it is a very safe and effective means of hollowing deep vessels through narrow openings. At the same time it can be used for coning - producing a series of bowls from the same blank with a minimum of waste wood. This same method enables picture frames and other large rings to be made. Included in the complete system is a chattertool assembly which enhances end grain by creating a myriad of different decorative effects. The RS2000 is available as a complete system (RS2000) with twenty components as indicated below in a wooden case or as a basic system (RS2001) which is identical to the complete system except for the elimination of the chattertool components. Alternatively components may be purchased individually to suit the turner’s requirements. The RS2000 is supplied with a comprehensive eight-page instructional manual full of useful guidance and illustrations.
Temp out of stock - R7 200,00 incl VAT
Nova Insert Chuck 1 1/4" 8TPI DVR lathe South Africa

NOVA INSERT CHUCK ILNS 1 1/4" 8 UNS RH DVR

WA-ILNS
Adapt your Insert Type NOVA chuck to a 1 1/4″ 8TPI UNS RH lathe. Allows you to keep the same chuck and accessories if you change your lathe. You only need to change the insert/adaptor. The internal thread is 1 1/4″ 8TPI UNS RH and the external thread matches the NOVA insert type chucks to simply and easily screw into the back of your NOVA Insert Type Chuck. Now your NOVA insert type chuck is ready to attach to your 1 1/4″ 8TPI UNS RH threaded lathe spindle.
Temp out of stock - R395,00 incl VAT
Nova Chuck G3 Insert Version South Africa

NOVA CHUCK G3 INSERT VERSION CHUCK

WA48202
NOVA G3 WOODTURNING CHUCK •Powerful and fast Tuff Lock geared action for smaller lathes •Convienient one handed operation with T bar handle – more time turning, less time preparing •Open back for easy cleaning and to reduce weight on smaller lathe spindles •4-Jaws Lock down solidly •Fits full range of NOVA Chuck Accessories •Special NOVA Wood turning profile on Jaws to cut into and grip wood fibres firmly •Precision machined from solid steel Its light weight, and with less overhang which is perfect for smaller lathe spindles. The small 1.79″ body length delivers less overhang from the spindle than the larger geared Chucks – the SuperNova2 Chuck and the Nova Titan Chuck, reducing stress on smaller lathe spindles. THIS IS THE “INSERT VERSION” CHUCK.PLEASE ENSURE THAT YOU SELECT THE CORRECT INSERT THAT MATCH THE THREAD OF YOUR PARTICULAR LATHE.
R2 850,00 incl VAT
Nova Chuck G3 M33 Version South Africa

NOVA CHUCK G3 M33 VERSION

WA48201
Recommended for power workholding on lathes up to 400mm/14” diameter swing. •Up to 350mm/14″ diameter bowls using 50mm/2” Jaws (supplied with chuck) •Up to 50mm/2″ length spigots (using 50mm/2” Jaws (supplied with chuck) •Full Packaged Weight (Std) 1.4kgs/3.1lbs. THIS G3 CHUCK IS NOT THE ”INSERT VERSION” BUT HAS AN M33X3.5 THREAD MACHINED IN THE BODY. IT WILL FIT DIRECTLY ON THE HEADSTOCK OF LATHES WITH A SIMILAR THREAD.
R3 055,00 incl VAT