Small 4 jaw independent chuck with 1" x 8 TPI

Although this is a small, quiet running extractor it has enough power to extract dust and wood debris from many small woodwork machines eg saws and planers. The inlet diameter is 100mm(4"), the outlet into the bag is 100mm(4") and the airflow is sufficient to handle the majority of waste likely to be produced in the small home workshop. A useful feature is that it is fitted with castors and a grab handle for easy movement around the shop. It can be used either on the floor or suspended from a sturdy wall using the two hanging brackets provided. Please note that this is a chippings extractor and should not be expected to collect every particle of fine dust. As with all the high volume low pressure airflow machines, the inlet should not be restricted to below 75mm diameter and the bag should be emptied regularly. NB). Supplied without any 100 mm extractor pipes or clamps needed for connecting to a woodworking machine.

This industrial quality motor with a specially designed blower wheel is designed for maximum performance, like extracting dust and debris from a planer or saw. The castors allow manoeuvrability in the workshop. The filter cartridges on top will filter out the finest dust up to 2 micron. Can be cleaned by spinning the top handle. Bottom dust collector bag is securely clamped and is easy to re-attach to drum. Please note: Supplied without any dust hoses

An optional charcoal filter is available, which will neutralise odours and harmful organic fumes or particles including pollen. Another optional accessory is a handy ceiling mounting kit consisting of 4 lengths of flexible stainless steel wire with screw eyes and bolt up crimps allows the machine to be positioned out of the way. Supplied with an electrostatic pre-filter, main filter and 4 mounting eyes. It needs a secure mounting capable of holding a 25kg static load, at least 2m off the ground. The machine runs reasonably quietly with noise levels of speed 1: 61dB, speed 2: 62dB, and speed 3: 64dB.