Close
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Toolmate

    Toolmate Combination Planer/Thicknesser (Straight Knives X 3) TMPTB260

    R23 000,00 incl VAT
    This combination Surfacer/Thicknesser (also called jointer/planer) is a light industrial rated machine with accurately ground, cast iron planing and thicknessing tables, together with a cast iron main frame. The mass of the machine dampens much of the vibration and this, together with a 3 knife cutter block spinning at 4,000rpm, results in a very clean finish on the workpiece. The in feed and out feed rollers can be deactivated when surfacing-resulting in less wear and more power to the cutter head. The aluminum tilting fence offers exceptional accuracy and stability when planing the edge of timber and can be set to any angle from 45⁰- 90⁰.
    SKU: WMPTB26
    Manufacturer part number: TMPTB260
    GTIN: 6009888756089
    Availability: In stock
    Manufacturer: Toolmate
    Availability: In stock
    SKU: WMPTB26
    Manufacturer part number: TMPTB260
    GTIN: 6009888756089

    Product Specification:


    The built-in dust extraction hood is positioned underneath the top table when surfacing and is swung up when thicknessing. Both of the tables must be tilted out of the way when thicknessing. The 3 knives in the cutter block can be is set using the excellent gauge supplied, or it can be done with any straight piece of wood using the traditional drag method with the back table as reference. Both tables are independently adjustable and electrical safety switches prevent accidental starting when the cutter head is exposed.
    The ticknessing table has a locking lever that will keep it secure on any height when thicknessing. The machine is also fitted with anti-kickback fingers when in hicknessing mode. Tip: Apply wax to the tables on a regular basis. This is especially important when thicknessing timber. It allows the wood to glide through the planer without sticking to the bottom surface. Any good quality furniture wax will do.

    • Power 1.5kW 230V 1ph
    • Feed Speed 8m/min
    • Cutterblock Speed 4,000rpm
    • Cutterblock Diameter 75mm
    • Max Thicknesser Capacity 250mm
    • Max Planing Width 250mm
    • Max Depth of Cut 2.5mm
    • Max Depth of Cut Thicknesser 2.5mm
    • Max Depth of Cut Planer 5mm
    • Knives HSS(Resharpenable)3/250 x 30 x 3 mm
    • Length of Table 260 x 1,090mm
    • Min Extraction Airflow Required 1,000m³/hr
    • Dust Extraction Outlet 100mm
    • Overall L x W x H 1,090 x 750 x 1,000mm
    • Weight 150kg
    Write your own review
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    Product Specification:


    The built-in dust extraction hood is positioned underneath the top table when surfacing and is swung up when thicknessing. Both of the tables must be tilted out of the way when thicknessing. The 3 knives in the cutter block can be is set using the excellent gauge supplied, or it can be done with any straight piece of wood using the traditional drag method with the back table as reference. Both tables are independently adjustable and electrical safety switches prevent accidental starting when the cutter head is exposed.
    The ticknessing table has a locking lever that will keep it secure on any height when thicknessing. The machine is also fitted with anti-kickback fingers when in hicknessing mode. Tip: Apply wax to the tables on a regular basis. This is especially important when thicknessing timber. It allows the wood to glide through the planer without sticking to the bottom surface. Any good quality furniture wax will do.

    • Power 1.5kW 230V 1ph
    • Feed Speed 8m/min
    • Cutterblock Speed 4,000rpm
    • Cutterblock Diameter 75mm
    • Max Thicknesser Capacity 250mm
    • Max Planing Width 250mm
    • Max Depth of Cut 2.5mm
    • Max Depth of Cut Thicknesser 2.5mm
    • Max Depth of Cut Planer 5mm
    • Knives HSS(Resharpenable)3/250 x 30 x 3 mm
    • Length of Table 260 x 1,090mm
    • Min Extraction Airflow Required 1,000m³/hr
    • Dust Extraction Outlet 100mm
    • Overall L x W x H 1,090 x 750 x 1,000mm
    • Weight 150kg
    Customers who bought this item also bought

    Toolmate Pro V.S Wood Lathe TMPWLB1443 550W

    WMB1443
    R11 200,00 incl VAT
    The Toolmate Pro TMPWLB1443 500W wood lathe is a variable-speed wood lathe that has a centre height of 175mm. The distance between the centers is 1,100mm and the head-stock is free to slide along the length of the bed. This Toolamate wood lathe comes completer with a floor stand and 4-prong drive. It also includes a revolving centre, face-plate, outboard extension, and a 300mm tool rest

    Jet Mini Lathe 4 Toothed Drive Cent MT2

    SP70833
    R590,00 incl VAT
    Fits into the hollow spindle on the headstock of any lathe .