Close
Filters

TREND DIGITAL DEPTH GAUGE JAW 60 MM

TREND DIGITAL DEPTH GAUGE JAW 60 MM

R810,00 incl VAT
R607,50 incl VAT
Digital depth gauge for router tables and saw benches. Horizontal and vertical measuring. For hand routers, router tables and saw benches. LCD readout for mm, imperial and fractions with auto shut off 5 mins. Removable pin to allow hole depths to be measured. Pin can be parked on arm. Hole depth 50.8 mm (2 inch). Self standing with magnetic feet and flat back. Injection plastic moulding with plastic rule. 60 mm wide aperture. Read-out has relative co-ordinate and absolute function. Includes small rebate clip that fits to the base of the rule to allow the rule to be set flush to a router table back fence. This product includes: 1 x 3V CR2032 lithium battery 1 x Small rebate clip
- +
Manufacturer: Trend
Availability: In stock
SKU: TA-GAUG
Manufacturer part number: GAUGE/D60

Measuring range 80 mm (3-1/8")
Opening width 60 mm (2-3/8")
Resolution 0.05 mm (0.002")
Accuracy +/- 0.1 mm (0.004")
Repeatability +/- 0.1 mm (0.004")
Max. Measuring speed 1.5 m/s (60 in/s)
Weight 92g
Voltage 3 volt
ABS mode (Absolute) Measuring single amounts from Zero
INC mode (Relative) Measuring from last point

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Picture of FINGER JOINT BIT-for 1/2"-3/4" THICK TIMBER - SHANK: 1/2"

FINGER JOINT BIT-for 1/2"-3/4" THICK TIMBER - SHANK: 1/2"

TAFJ-01
R1 737,40 incl VAT
TREND 1/4 INCH COLLET AND NUT SET - SOUTH AFRICA

TREND 1/4 INCH COLLET AND NUT SET

TACECNS
Will also fit the following machines:- Atlas Copco (AEG) OFSE2000, Freud FT2000E,FT2200E, FT3000VCE, Casals FT2000VCE.
R1 435,00 incl VAT R1 076,25 incl VAT
TREND VARIJIG SYSTEM ADJUSTABLE FRAME - SOUTH AFRICA

Trend Varijig System Adjustable Frame VARIJIG

TA-VJFS
Adjustable frame and guide for use with a router. Adjustable frame for rectangles and squares. Allows a router to cut recesses, slots, face panel moulds etc. Can also be used to create panel doors for kitchens etc. Four lengths of 700 mm extrusion with dual metric/imperial measuring scales. Working area 600 mm x 600 mm. Crosscut accuracy to 0.1 mm, a square is required to the square frame before use. Includes router anti-tilt block. Used with a guide bush with a minimum of 8 mm spigot length, or use Unibase as a guide. Secure with standard clamps or use an optional clamp kit. 4 x Alloy Extrusion with Scales 4 x Corner brackets 1 x Anti-tilt shoe 1 x Anti-tilt Shoe fixing screw
R2 295,00 incl VAT R1 721,25 incl VAT
RYOBI MOISTURE METER 2-IN-1 SOUTH AFRICA

RYOBI MOISTURE METER 2-IN-1

HTMM210
Compact and portable meter for quickly and accurately reading the moisture content level of different materials. Digital LCD display shows the moisture content percentage with either prongs or built-in sensors. Hold function and ambient temperature measurements. Ideal for use on wood, plaster, concrete, mortar, and other building materials.
R725,00 incl VAT R650,00 incl VAT
Picture of RABBETING BIT-3/8" DEEP- SHANK: 1/2"

RABBETING BIT-3/8" DEEP- SHANK: 1/2"

TAP3502
Call for pricing