Close
Filters

Trend

When Jim Phillips founded Trend in 1955, little did he realize the impact the company would have in developing the routing skills of users worldwide. The key to continued success for five decades has been our approach to innovative products that genuinely offer woodworkers new and exciting ways to develop routing skills. Every year, for the past 50 years, Trend have launched new and innovative products that donĀ“t just meet industry standards, they exceed them.

View as Grid List
Sort by
Display per page
TREND 11.3 MM DOVETAIL CUTTER - SOUTH AFRICA

TREND 11.3 MM DOVETAIL CUTTER

TA-3130
Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.
R455,00 incl VAT
TREND T5 ROUTER FENCE - SOUTH AFRICA

Trend T5 Router Fence WPT5/046

TA-5046
The side fence has a fine micro adjuster to enable precise adjustment of the position of the cut. The fence cheeks are wide to provide good support and adjustable to suit the size of the cutter. An optional second fence will provide extra support when edging or mortising narrow timber. The plastic sliding cheeks can be adjusted to reduce the cutter aperture. A fence can be used with Elu MOF96, Dewalt DW613, DW615 and other similar routers with fence rods of 8 mm diameter and 84 mm centres.
R1 278,00 incl VAT
TREND ROUTER T10 COLETT & NUT SET 1/4" - SOUTH AFRICA

TREND ROUTER T10 COLETT & NUT SET 1/4"

TA-5635
Multi-slit spring steel collet & nut set for the collet extension. Will also fit the following machines:- Atlas Copco (AEG) OFSE2000, Freud FT2000E, FT2200E, FT3000VCE, Casals FT2000VCE.
Call for pricing
TREND BENCH HOLDER FOR BENCH STONE - SOUTH AFRICA

TREND BENCH HOLDER FOR BENCH STONE

TA-BHB7
Adjustable to clamp 6 inch to 8 inch bench stones securely, (will also accept most oil stones up to 8 inch)
R565,67 incl VAT
TREND 9.5 MM BEADLOCK BEAD ROUTER CUTTER - SOUTH AFRICA

TREND 9.5 MM BEADLOCK BEAD ROUTER CUTTER

TA-BL95
This item has been discontinued and will not be available after these have been sold out
Call for pricing
TREND BEADLOCK DOWEL 3P/P 9.5 X 300 MM - SOUTH AFRICA

TREND BEADLOCK DOWEL 3P/P 9.5 X 300 MM

TA-BLDW
This item has been discontinued and will not be available after these have been sold out
R89,00 incl VAT
TREND TWO FLUTE CUTTER 4.8 MM DIAMETER - SOUTH AFRICA

Trend Two Flute Cutter 4.8 MM Diameter C003X1/4T

TA-C003
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Used on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature
R299,00 incl VAT
TREND TWO FLUTE 12.55 DIAM 1/4" SHANK - SOUTH AFRICA

Trend Two Flute 12.55 Diameter 1/4" Shank C021AX1/4TC

TA-C021
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Used on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature.
R367,51 incl VAT
TREND TWO FLUTED R/BIT 15.9 MM 25.4 MM CUT - SOUTH AFRICA

Trend Two Fluted R/bit 15.9 MM 25.4 MM Cut C025/1/4T

TA-C025
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Used on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature.
R367,51 incl VAT
TREND TWO FLUTE CUTTER 12MM DIAMETER SOUTH AFRICA

Trend Two Flute Cutter 12mm Diameter C172X1/2TC

TA-C172
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Used on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature.
R610,00 incl VAT
TREND DOVETAIL 19.1 MM X 97 DEGREES X 25 MM CUT - SOUTH AFRICA

TREND DOVETAIL 19.1 MM X 97 DEGREES X 25 MM CUT

TA-C179
These cutters are for Trend Craft Dovetail Jigs.
R595,00 incl VAT
TREND 3/16 DIA X 1/2 DC COUNTERBORE - SOUTH AFRICA

TREND 3/16 DIA X 1/2 DC COUNTERBORE

TA-CB12
The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g. 501/532 to 501/012.
R555,00 incl VAT
Picture of TREND 5/32 DIA X 3/8 DC COUNTERBORE

TREND 5/32 DIA X 3/8 DC COUNTERBORE

TA-CB38
The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g. 501/532 to 501/012.
R465,00 incl VAT
TREND 1/4 DIA X 5/8 DC/S COUNTERBORE - SOUTH AFRICA

TREND 1/4 DIA X 5/8 DC/S COUNTERBORE

TA-CB58
The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with an HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g. 501/532 to 501/012.
R450,00 incl VAT
TREND 610 MM CLAMP GUIDE FOR T5  ROUTER - SOUTH AFRICA

TREND 610 MM CLAMP GUIDE FOR T5 ROUTER

TA-CG24
Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal for holding and clamping work pieces. Aluminium extrusion incorporating T-slots. The clamps are fitted with a metric/imperial scale for setting lengths and stop positions. Scale can be positioned by removing 20mm of the self adhesive backing. Three lengths of clamp available 24 inch, 36 inch and 50 inch. Router not included. Patent No. US7,007,731.
R1 055,00 incl VAT

Filter by:

Clear All
Min: R0,00 Max: R8 940,00
R0 R8940