Close
Filters

TREND MORTISE & TENON JIG 5 BIT SET

TREND MORTISE & TENON JIG 5 BIT SET

R1 739,14 incl VAT
R1 304,35 incl VAT
A set of five long reach straight cutters with diameters of 1/4 inch to 5/8 inch suitable for use with the Mortise and Tenon Jig. This product includes: •1 x 1/4 inch dia x 1 inch cut straight •1 x 5/16 inch x 1 inch cut straight •1 x 3/8 inch dia x 1-1/4 inch cut straight •1 x 1/2 inch dia x 1-1/4 inch cut straight •1 x 5/8 inch dia x 1 inch cut straight
- +
Manufacturer: Trend
Availability: In stock
SKU: TAMT1X1
Manufacturer part number: SET/MT1X1/4TC


Shank Diameter 1/4 inch
Straight 6.35mm dia x 25.4mm cut
Overall length 68.5 mm
Straight 7.9mm dia x 25.4mm cut
Overall length 68.5 mm
Straight 9.5mm dia x 31.8mm cut
Overall length 72.5 mm
Straight 12.7mm dia x 31.8mm cut
Overall length 72.5 mm
Straight 15.9mm dia x 25.4mm cut
Overall length 75.5 mm

Video Link https://www.youtube.com/watch?v=OT3i6CNEjUo

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
TREND MORTISE & TENON JIG - SOUTH AFRICA

TREND MORTISE & TENON JIG

TAMTJIG
Enables mortise & tenons and dowel joints to be cut with a router. Ideal for cabinet, chair and table. CNC precision manufactured plates and body. One set-up for both mortise and tenon giving perfectly fitting joints. Fully adjustable for compound angle joints up to 45 degrees. Reversible templates to produce round and square end tenons. Templates can be used for accurate dowelling applications. Cuts mortise & tenon sizes of 1/4 inch (6.35 mm) to 5/8 inch (15.9 mm). Guide bushes are included but cutters are required. A Unibase may be required for certain makes & models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl No. PCT/GB02/00253. Jig requires: A portable plunge router with 6.35 mm (1/4 inch) shank capacity. 5 x Plastic guide bushes 15.9 mm, 22.2 mm, 28.6 mm, 30.2 mm & 31.8 mm 1 x Metal guide bush 25.4 mm 4 x Clamps 1 x Guide bush collar 1 x Set-up Bar imperial scale
R6 230,53 incl VAT R4 672,90 incl VAT
TREND UNIBASE - SOUTH AFRICA

Trend Unibase UNIB

TA-UNIB
The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4 inch, 8 mm, 12 mm and 1/2 inch. Instructions for fitting: The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available. Includes: 1 x Line up pin 8 & 12 mm shank 1 x Guide bush 16 mm 1 x Fixing screw pack
R692,86 incl VAT R519,64 incl VAT
Picture of TOOLMATE 275MM DRILL PRESS TOOL TRAY

TOOLMATE 275MM DRILL PRESS TOOL TRAY

TADC911
R295,00 incl VAT R195,00 incl VAT