Close
Filters

TREND LOCK JIG

TREND LOCK JIG

Temp out of stock : R3 250,00 incl VAT
R2 437,50 incl VAT
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. For most common sash mortises & deadlocks, with up to 3 inch deep mortises & a 7/8 inch or 1-inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34 mm to 58 mm thick, even in hardwood. Steel plates & body. An auger bit and drill are required to complete deep mortises. The jig requires a 1/2- inch plunge router with an 80 mm plunge, fitted with a 30 mm guide bush with 6 mm spigot & 12 mm diameter long reach cutter. A 1/4-inch plunge router can be used for the faceplate but will not achieve full depth of mortise. 1 x Guide Bush Collar 12 x Face Plate Templates 4 x Mortise Templates 6 x Spacer Fingers
Manufacturer: Trend
Availability: Out of stock
SKU: TA-LJIG
Manufacturer part number: LOCK JIG

Door thickness min. 34 mm
Door thickness max. 58 mm
Template outer size 234.3 x 59.8 x1.5 mm
Includes templates for locks having the following face-plate dimensions:
Metric (Imperial approx.) (D x OL) Template
22.2x156 mm (7/8"x 6 1/8") 1
22.5x152.5 mm (7/8"x 6") 2
25.4x121 mm (1"x 4 3/4") 3
25.4x127.5 mm (1"x 5") 4
25.4x133.5 mm (1"x 5 1/4") 5
25.4x145 mm (1"x 5 3/4") 6
25.4x153 mm (1"x 6") 7
25.4x156.5 mm (1"x 6") 8
25.4x165.5 mm (1"x 6 1/2") 9
25.4x177 mm (1"x 7") 10
25x57.5 mm (1"x 2 1/4") 11 UPPER
26x56.5 mm (1"x 2 1/4") 11 LOWER
25.6x162mm (1"x 6 3/8") 12
Mortise Lock Dimensions
Imperial (Metric) (D x OL) Template
16x72 mm* (5/8" x 2 7/8") A
16x107 mm* (5/8" x 4 1/4") B
19x78 mm* (3/4" x 3 1/8") C
19x109 mm* (3/4" x 4 1/4") D
*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7 mm longer.

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Picture of STRAIGHT BIT - 2 FLUTE - BOTTOM CUTTER 1/2" DIAMETER  x 63.7 LONG - SHANK: 1/2"
TREND UNIBASE - SOUTH AFRICA

Trend Unibase UNIB

TA-UNIB
The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4 inch, 8 mm, 12 mm and 1/2 inch. Instructions for fitting: The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available. Includes: 1 x Line up pin 8 & 12 mm shank 1 x Guide bush 16 mm 1 x Fixing screw pack
R692,86 incl VAT Temp out of stock - R519,64 incl VAT
Picture of MAKITA RP1800X ROUTER

MAKITA RP1800X ROUTER

PPRP180
Powerful motor delivers smooth routing. Precise cutting depth adjustment. Ergonomically contoured knob style handles fit operator's hands perfectly. Linear ball bearing for super-smooth plunge action. Increased durability obtained by using larger size ball bearing on the drive-end of armature, labyrinth type retainers and fun. Double Insulation and Dust Collecting. Cast aluminium fence with precise adjustment for accurate cuts Template guide can be inserted without special tools.
R7 475,00 incl VAT
TREND BUTT HINGE TEMPLATE (3 INCH + 4 INCH HINGES) - SOUTH AFRICA

TREND BUTT HINGE TEMPLATE (3 INCH + 4 INCH HINGES)

TA75100
A routing template that allows a router to create a hinge recess on a door. Made from clear 8 mm thick plastic. Includes metal templates for 75 mm and 100 mm butt hinges. Magnets in template frame to hold templates. Cuts rounded corners which can be removed with a corner chisel or chisel. Use on doors from 35 mm to 44 mm thick. Requires 12 mm diameter cutter and 30 mm guide bush. A user made batten 44 mm x 34 mm x 450 mm is also needed. This product includes: 1 x 75 mm hinge template 1 x 100 mm hinge template
R1 320,89 incl VAT R990,67 incl VAT
TREND TWO FLUTE CUTTER 12 MM DIAMETER - SOUTH AFRICA

Trend Two Flute Cutter 12 MM Diameter TR37X1/2TC

TA-TR37
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2 mm micro-grain Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particleboard. Etched dimensions on extra-long 40 mm shanks.
R810,00 incl VAT R607,50 incl VAT