Close
Filters

TORK CRAFT 8 INCH / 203MM DADO SET

TORK CRAFT 8 INCH / 203MM DADO SET

Call for pricing
TORK CRAFT DADO STACK IN WOODEN BOX
- +
Manufacturer: Tork Craft
Availability: Out of stock
SKU: TA24311

TORK CRAFT DADO STACK IN WOODEN BOX

  • Cuts grooves from 3.4mm to 25.4mm
  • Stacking with carbide tops
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Picture of MAKITA M9507B ANGLE GRINDER ANGLE

MAKITA M9507B ANGLE GRINDER ANGLE

PPM9507
High-performance semi-industrial machine with enough power for masonry cutting and high heat resistance.
R1 410,00 incl VAT R1 148,54 incl VAT
Picture of ROBERT SORBY PARTING TOOL SLIM FLUTED 1/16" (2MM)

ROBERT SORBY PARTING TOOL SLIM FLUTED 1/16" (2MM)

TA-832H
Slim Fluted Parting Tool, features a radically new and unique cutting profile with a blade profile of only 2mm. The long bevel has a flute which is the cutting face. The small bevel is the sharpening face. When parting off this unique arrangement causes the tip to always cut at a shear cutting angle of 45°, producing a finish without equal from a parting tool, virtually eliminating the need for sanding.
Call for pricing
Robert Sorby Turnmaster HSS Detail Point Cutter South Africa

ROBERT SORBY TURNMASTER HSS DETAIL POINT CUTTER

TA-TIP2
This cutter is perfect for roughing down square stock to round and is therefore ideal for spindle work. As its name suggests its fine point also allows for fine detail on bowls and spindles. Shear scraping with this cutter is NOT recommended. Made with M2 HSS these popular cutters offer excellent sharpness while delivering Robert Sorby HSS reliability. Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster
R213,57 incl VAT
Robert Sorby Turnmaster HSS Square Cutter South Africa

ROBERT SORBY TURNMASTER HSS SQUARE CUTTER

TA-TIP3
Designed for generating square sections such as shoulders or tenons where a turned part is to be assembled into a hole – a chair leg is good example. This cutter is also useful on the outside of a round form, as well as long straight sections on spindle work. Excellent results can be achieved in shear scraping mode with cutter especially effective shear scraping on the outside of a bowl. Manufactured with Robert Sorby high speed steel ensures ultimate material reliability. Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster
R315,00 incl VAT
Robert Sorby Turnmaster HSS Dovetail or Box Cutter South Africa

ROBERT SORBY TURNMASTER HSS DOVETAIL / BOX CUTTER

TA-TIP5
This cutter is designed to create parallel side walls and 90 degree corners in boxes. It also creates dovetails and tenons to mount timber on scroll chucks. Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2-0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster
R215,00 incl VAT
Robert Sorby Turnmaster HSS Teardrop Cutter South Africa

ROBERT SORBY TURNMASTER HSS TEARDROP CUTTER

TA-TIP6
This incredibly popular and versatile cutter shape delivers on multiple levels. Use the straight side for scraping and shear scraping outside forms, and the curved edge for scraping and shear scraping inside forms. Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2-0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster
R220,00 incl VAT