You have no items in your shopping cart.
Close
Filters

TOOLMATE TMBSR315A 315 BANDSAW

TOOLMATE TMBSR315A 315 BANDSAW

R8 500,00 incl VAT
A medium duty bandsaw ideal for serious hobby use.Perfect for cutting round bowl blanks prior to turning in the lathe.
- +
Manufacturer: Toolmate
Availability: In stock
SKU: WMBS315

Also suitable for resawing thick timber into thinner planks. Extra large cast iron table with wide trunnions ensures stability.                                           

Table can tilt from -10⁰ to + 45⁰. The blade tensioning screw is on top and is easy to adjust. .Strong upper and lower blade guides keep the blade sturdy when doing resawing.Blades with a width from 3-13mm can be used,. Has a large quick lock rip fence. Uper and lower doors are fitted with safety swiches. Sheetmetal stand is well made and sturdy  Includes fence and mitre gauge.

  • Blade size: 2240MM
  • Cutting capacity: 180 MM DEEP
    305 MM THROAT
  • Speed: 2 SPEEDS 360 & 720 m/min
  • Depth of cut: 175mm with 315mm width of cut. Bandsaw Blade Length 2240mm (88")
  • Bandsaw Wheel Diameter 315 mm
  • Blade Width Min\Max 6 mm to 16 mm
  • Dust Extraction Outlet 100 mm
  • Max Cutting thickness 175 mm
  • Max Width of Cut 315 mm
  • Min Extraction Airflow Required 850 m³/hr
  • Table Height on Stand 1,035 mm
  • Table Size 400 x 500mm
  • Table Tilt 0° - 45°g"
  • Motor power: 750W-230V
Write your own review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Robert Sorby Scraper Bowl Finishing Inboard South Africa

ROBERT SORBY SCRAPER BOWL FINISHING INBOARD

TA-8008
Designed for finishing large bowls when working inboard (curve on left)
R1 800,00 incl VAT
Robert Sorby Diamond Parting Tool 3/16" (5mm) South Africa

ROBERT SORBY DIAMOND PARTING TOOL 3/16" (5MM)

TAP831H
Robert Sorby Diamond Parting Tool, tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby lessening the chance of burning the bottom of the parted off project.
R1 235,00 incl VAT
Robert Sorby Skew Oval Chisel 1 1/4" (32mm) South Africa

ROBERT SORBY SKEW OVAL CHISEL 1 1/4" (32MM)

TA80911
Oval Skew Chisels were originally designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrading and chair legs. These tools are indispensable if a fine finish is required from the tool.
R1 378,11 incl VAT
Robert Sorby Bowl Gouge Unhandled 3/8"

ROBERT SORBY BOWL GOUGE 3/8" UNHANDLED

TA--842
Bowl Gouges are must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary.
R955,00 incl VAT
Picture of ROBERT SORBY TEARDROP SCRAPER CUTTER

ROBERT SORBY TEARDROP SCRAPER CUTTER

TARS222
The Robert Sorby small tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of small bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Related Products: This cutter is designed for use with the following tools: Midi Multi-tip Hollowing System (RS100KT, RS100) RS2000 Deep Hollowing System
R222,00 incl VAT