Sorby 600 Grit Diamond Sharpener

When it comes time to sharpen your Sorby TurnMaster cutters, you'll need something besides your fingers to hold them. That's where the Sharpening Holder comes in handy. It has a narrow tip with a fastening screw that will hold your cutter at any angle so you can grind safely. The tip of the holder is narrow, so as not to get in the way. Features: Allows you to safely sharpen TurnMaster cutters without putting your fingers in danger Made of rugged steel with a textured finish

Turnmaster Mushroom Cutter is designed for undercutting mushroom shapes, but is also ideal for hollowing out small forms. Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2-0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster HIgh Speed Steel†

Turnmaster Round Cutter is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms. It works equally efficiently on spindle work. Manufactured with the highest quality high speed steel and coated with a titanium nitride powder coating, this cutter will provide excellent endurance with incredible sharpness. Switch the TurnMaster into shear scraping mode and this cutter also delivers an extremely fine finish that requires little or no sanding. Sharpening: Use a diamond file or honing stone around the profile of the cutter. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.15 -0.2 microns Hardness of coating up to 85RC Material: TIN coating on M2 HSS Related Products: These cutters are designed specifically for the TurnMaster

Turnmaster Mushroom Cutter is designed for undercutting mushroom shapes, but is also ideal for hollowing out small forms. The titanium nitride coating affords increased longevity of the cutter while at the same time relating ease of sharpness. Sharpening: Use a diamond file or honing stone around the profile of the cutter. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.15 -0.2 microns Hardness of coating up to 85RC Material: TIN coating on M2 HSS Related Products: These cutters are designed specifically for the TurnMaster

The NOVA JS20N (20mm/0.78″) Mini Accessory Chuck Jaw set is for small bowls and unsupported small spigot turning. Ideal for midi/mini lathe work. •Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres. •All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes •Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. •Perfect for small bowls and unsupported spigot work. CHUCK SHOWN FOR DISPLAY PURPOSES ONLY. CHUCK NOT INCLUDED.