ROBERT SORBY SKEW OVAL CHISEL 3/4" (19MM)

R962,06 incl VAT

Oval Skew Chisels were originally designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrading and chair legs. These tools are indispensable if a fine finish is required from the tool.

- +

Overview
Details
Reviews
Downloads

Manufacturer: Robert Sorby

Availability: In stock

SKU: TA80934

Manufacturer part number: 809H

Description:

Oval Skew HSS 3/4" Handled.

Sovereign Compatible No
Handled Version Yes
Size 3/4"
Forged in Sheffield England
HSS Rockwell 62 RC

Customers who bought this item also bought

ROBERT SORBY SPINDLE GOUGE STANDARD GRIND 3/8" (10MM)

TA84038

Spindle Gouge's are detailing tools used on between- centre work, where the grain is running parallel to the lathe bed. Create beads or coves on table legs, candle sticks etc.

R667,31 incl VAT

ROBERT SORBY STANDARD PARTING TOOL 1/8" (3MM)

TAP830H

Parting Tool's are used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The ⅛" – 3mm tool reduces the amount of waste, vital if using an expensive wood. It also makes for a fine detailing tool, e.g. beads and fillets.

R690,00 incl VAT

ROBERT SORBY ROUGHING GOUGE 3/4"

TAP843H

Robert Sorby Roughing Gouge 3/"4, for the initial turning of uneven or square spindle stock to round. The shape of the spindle roughing gouge enables the tool to cut safely with the wings (the tips of the side walls) well back from the workpiece.

Call for pricing

ROBERT SORBY BOWL GOUGE STANDARD GRIND 3/8"

TAP842H

Bowl Gouges are must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary.

R1 172,28 incl VAT

ROBERT SORBY NEGATIVE RAKE SCRAPER 3/4" (19MM) UNHANDLED

TA--821

Negative Rake Scraper or Hardwood Scraper, it was originally designed to tackle hardwoods when producing musical instruments. However, the tool is equally at home on all types of wood and is as effective on spindle work as it is on bowls - the action of the negative rake on the bevel reducing the risk of grain tear-out and leaving a polished surface that requires little or no sanding.

R754,30 incl VAT

TMT CHUCK 2-1/2"" 4 JAW 1 X 8TPI WITH 3/4'' X 16TPI ADAPTER

WACK25A

Small 4 jaw independent chuck with 1" x 8 TPI

R2 975,00 incl VAT