ROBERT SORBY ROUND NOSE SCRAPER 1" (25 MM)

The pen is easy to make and would suit beginners to pen turning. Recommended blank size: 20mm X 20mm x 140mm Skill Level: Beginners Tools required for turning this pen: • Turing chisel i.e. Robert Sorby • Wood Lathe i.e. JET or NOVA • Pen Mandrel MT1 OR MT2 – Depending on which fits your lathe • Mandrel saver – Saves your pen mandrel from bending and saves your live centre from damaging point. • Sierra Pen Kit • 7mm drill bit • 6.18mm Barrel trimmer • Pen vice and pen assembly press (Optional) • Epoxy glue – to glue barrel to blank • Cyanoacrylate glue – SQ to hold burl wood blank together and MQ to finish pen (Optional) • Sandpaper i.e. Klingspor Dry paper

These are an indispensable addition to the turner's armoury for measuring both wall thickness and diameters. Because of their design the measurement taken at one end automatically transfers to the opposite end. This enables the turners to take an accurate measurement reading without the need to remove the callipers. Available in 4" and 7" models. The 7" version has an increased depth of throat at one end which permits the callipers to be used in large diameter vessels which have restricted openings.

This pen kit has a very distinctive look and premium feel to it, great pen to show off wood burl and fancier looking woods. Recommended blank size: 20mm X 20mm x 140mm Skill Level: Beginner Tools required for turning this pen: • Turing chisel i.e. Robert Sorby • Wood Lathe i.e. JET or NOVA • Pen Mandrel MT1 OR MT2 – Depending on which fits your lathe • Mandrel saver – Saves your pen mandrel from bending and saves your live centre from damaging point. • Churchill Pen Kit • 11.7mm drill bit (BODY OF PEN); 13.2mm drill bit (PEN CAP) • 12.5mm barrel trimmer • Pen vice and pen assembly press (Optional) • Epoxy glue – to glue barrel to blank • Cyanoacrylate glue – SQ to hold burl wood blank together and MQ to finish pen (Optional) • Sandpaper i.e. Klingspor Dry paper

Coles Jaws are designed for re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned Other NOVA jaw sets can be fitted to the Cole Jaws making a combination jaw facility Suitable for lathes with minimum 12-Inch diameter swing Additional accessory rubber bumpers are available 2-Year Warranty

The NOVA JS70N 70mm (2.75″) Chuck Accessory Jaw Set is perfect for bowl and spigot projects. Designed for expanded dovetail and reverse dovetail holds, for gripping footed bowls. •Special NOVA dovetail profile, designed to maximum strength and holding in woodturning, without crushing wood fibers. •All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes •Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. CHUCK NOT INCLUDED (FOR DISPLAY PURPOSES ONLY).

The NOVA JS100N is one of our most popular chuck accessories to mount 12-14″ bowls. Mount customized false wooden jaws and the customized jaws can be made for special purposes. They are built with a turning dovetail profile to maximize strength without jeopardizing wood fibers, and can hold both in contraction and expansion modes. High tensile 1045 steel makes up the JS100N for precise closing, durability, and a long life. Comes with 4 jaw segments and instructions. Uses the standard fasteners that come with your NOVA Chuck.