Spindle Gouge's are detailing tools used on between- centre work, where the grain is running parallel to the lathe bed. Create beads or coves on table legs, candle sticks etc.

Robert Sorby Roughing Gouge 3/"4, for the initial turning of uneven or square spindle stock to round. The shape of the spindle roughing gouge enables the tool to cut safely with the wings (the tips of the side walls) well back from the workpiece.

Oval Skew Chisels were originally designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrading and chair legs. These tools are indispensable if a fine finish is required from the tool.

Parting Tool's are used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The ⅛" – 3mm tool reduces the amount of waste, vital if using an expensive wood. It also makes for a fine detailing tool, e.g. beads and fillets.

Superior Danish Oil is a blend of pure, high quality tung oil and natural oils that feed, enhance and protect hard and soft woods. It is a penetrating oil, which brings out the natural grain of the timber and provides a satin to gloss sheen. With added UV filters to help prevent discolouration from the sun, and water, heat and alcohol resistant, it is suitable for both interior and exterior use. It is safe for use on toys.

RTV Pro-Mould 30 is a two part, room temperature curing silicone rubber and is based on condensation curing (Tin Cure). Pro-Mould 30 has excellent tear resistance and has low linear shrinkage. Pro-Mould 30 is typically used for mould making, and has good fluidity and easy to demould. It has good mechanical properties with good tensile and tear strength. RTV-Thixo can be added for brush-on applications. Mixed silicone will be a light purple colour.