Close
Filters

Nova

View as Grid List
Sort by
Display per page
Nova Chuck Jaws 70mm South Africa

NOVA CHUCK JAWS 70MM

WAJS70N
The NOVA JS70N 70mm (2.75″) Chuck Accessory Jaw Set is perfect for bowl and spigot projects. Designed for expanded dovetail and reverse dovetail holds, for gripping footed bowls. •Special NOVA dovetail profile, designed to maximum strength and holding in woodturning, without crushing wood fibers. •All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes •Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. CHUCK NOT INCLUDED (FOR DISPLAY PURPOSES ONLY).
R890,00 incl VAT
Nova Chuck Jaws 25mm South Africa

NOVA CHUCK JAWS 25MM

WAJS25N
The 25mm Jaw Set substitutes for the standard 50mm jaws for use on small work with 3/8″-1-1/4″ spigots, as a type of pin chuck with 1″ capacity, for expanding dovetail work on bowls up to 6″ dia. and for 1/2″-1″ square blanks. •Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres. •All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes •Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. •Perfect for small bowls and unsupported spigot work. CHUCK SHOWN FOR DISPLAY PURPOSES ONLY. CHUCK NOT INCLUDED.
R750,00 incl VAT
Nova Chuck Jaws 20mm South Africa

NOVA CHUCK JAWS 20MM

WAJS20N
The NOVA JS20N (20mm/0.78″) Mini Accessory Chuck Jaw set is for small bowls and unsupported small spigot turning. Ideal for midi/mini lathe work. •Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres. •All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes •Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. •Perfect for small bowls and unsupported spigot work. CHUCK SHOWN FOR DISPLAY PURPOSES ONLY. CHUCK NOT INCLUDED.
R850,00 incl VAT
Nova Insert Chuck 1 1/4" 8TPI South Africa

NOVA INSERT CHUCK IYNS - 1 1/4" 8TPI UNS RH

WA-IYNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R345,00 incl VAT
Nova Insert Chuck 7/8" 14 UNF South Africa

NOVA INSERT CHUCK IVNS - 7/8" 14TPI UNF RH

WA-IVNS
• Precision machined from 1045 High Tensile Steel • Genuine NOVA product • Fits all NOVA Insert Type Chucks for maximum flexibility and adaptability • Quickly and inexpensively adapt your NOVA chuck to almost any lathe depending on insert thread size
R395,00 incl VAT
Nova Chuck Jaws Pin South Africa

NOVA CHUCK JAWS PIN

WAJSPIN
The NOVA JSPIN Pin Accessory Chuck Jaw set have a long nose, designed to act like a pin chuck – expanding into a pre-bored hole, a very useful technique for free form edged bowls. You don't have to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins. They are also ideal for longer dowel work. Twist drils can also be gripped to enable the chuck to be used as a drill chuck. The jaw set features a small dovetail to mount small bowls. • Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres. • All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes • Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. • Designed to act like a Pin Chuck – expanding into a pre-bored hole.
Call for pricing
Nova Insert Chuck 5/8" South Africa

NOVA INSERT CHUCK ISNS - 5/8" BORE SHOPSMITH

WA-ISNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT
Nova Insert Chuck M x 3.5 RH South Africa

NOVA INSERT CHUCK IQNS - M30 X 3.5 RH

WA-IQNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT
Nova Insert Chuck Blank South Africa

NOVA INSERT CHUCK INNS - BLANK CUT TO THREAD

WA-INNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT
Nova Insert Chuck 1 1/4" 8TPI DVR lathe South Africa

NOVA INSERT CHUCK ILNS 1 1/4" 8 UNS RH DVR

WA-ILNS
Adapt your Insert Type NOVA chuck to a 1 1/4″ 8TPI UNS RH lathe. Allows you to keep the same chuck and accessories if you change your lathe. You only need to change the insert/adaptor. The internal thread is 1 1/4″ 8TPI UNS RH and the external thread matches the NOVA insert type chucks to simply and easily screw into the back of your NOVA Insert Type Chuck. Now your NOVA insert type chuck is ready to attach to your 1 1/4″ 8TPI UNS RH threaded lathe spindle.
Call for pricing
Nova Insert Chuck M18 x 2.5 South Africa

NOVA INSERT CHUCK IKNS - RH M18 X 2.5

WA-IKNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT
Nova Insert M24 x 3 South Africa

NOVA INSERT CHUCK IINS - RH M24 X 3

WA-IINS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT
Nova Insert 3/4" 10UNC South Africa

NOVA INSERT CHUCK IHNS - RH 3/4" 10 UNC

WA-IHNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT
Nova Insert Chuck 1" x 12TPI South Africa

NOVA INSERT CHUCK IENS - 1" X 12TPI UNF

WA-IENS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT
Nova Insert Chuck 1" x 8TPI South Africa

NOVA INSERT CHUCK IDNS - RH 1" X 8TPI UNC

WA-IDNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
R395,00 incl VAT

Filter by:

Clear All
Min: R290,00 Max: R53 500,00
R290 R53500