Nova Chuck Spur Centre 19mm

This precision machined live center features a triple bearing construction for heavy duty use and long life. Hollow center design makes it capable of accepting a 5/16" shell Auger for lamp stand boring. Threaded center has a 5/16" bolt so it can act as an arbor to mount a variety of projects and a miniature reverse cone function to centerless mount miniature round turnings (e.g. lace bobbins) up to 12mm (0.47"). All separate centers that fit into the Nova Live Center have a 2MT taper so they can be directly mounted to 2MT Tailstock spindle. The Nova Live Center System includes a large stepped cone able to handle centerless rounds up to 40mm (over 1-1/2"), a stepped cone that can be reversed to wedge fit hollow sections from 26mm (1") to 32mm (1-1/4"), and a threaded center with a screw that can mount special wooden supports.

Our new NOVA 1/2″ Drill Chuck is a precision chuck for use with our NOVA Wood lathes and NOVA DVR Drill Presses. Perfect drill chuck accessory for NOVA Lathes, or any lathe or drill press with a 2MT spindle. It can hold 1/6 inches/1.58mm through to 1/2inch/12.7mm.

The NOVA JS75DT Step Chuck Accessory Jaw Set has three step sizes providing optimum gripping of 3 base (foot) sizes with minimal crush damage to wood. The optimum step sizes are 1.65″, 2″, 2.5″. • Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres. • All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes • Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. (Jaws Only)

Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also allows nearly full diameter contact with the workpiece, since you can turn out to the exact diameter required. Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also allows nearly full diameter contact with the workpiece, since you can turn out to the exact diameter required. Features: •Nylon can be turned to shape using standard tools. They can be turned, sawn, drilled or tapped. •Because they are made of nylon, they hold most woods without marking. •Vibrant red color makes it easy to see profiles. By machining the profile after mounting, you can eliminate any errors that may have added up from mounting the jaws to the chuck, then to the spindle. •Maximum contact with workpiece. Near full diameter contact is achievable, since you can turn out to the exact diameter required. •Thick jaw body lets user profile any shape they wish, limited only by the fastening heads, which are embedded 22.5mm from the face of the jaws. •Outer ring diameter when closed: 120mm (4.7"). •Thickness: 27mm (1"). Tips for customizing the soft jaws: •It is recommended to use a scraper that is about 1/2" wide, with an end that is 90° to the side of the scraper. It will cut on both sides and on the end. •Recommended bevel angle is about 70 degrees. •When scraping nylon, the tool rest must be as close to the work as possible and you must always use a light touch. •Run your lathe at a speed between 1700 and 2000 rpm for best cutting. •You must take extra care when machining the jaws so as not to hit to hit the screw heads. Features standard on all Nova Jaws: •Nova chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models. •All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations. •Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.

The NOVA JS70N 70mm (2.75″) Chuck Accessory Jaw Set is perfect for bowl and spigot projects. Designed for expanded dovetail and reverse dovetail holds, for gripping footed bowls. •Special NOVA dovetail profile, designed to maximum strength and holding in woodturning, without crushing wood fibers. •All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes •Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. CHUCK NOT INCLUDED (FOR DISPLAY PURPOSES ONLY).