Close
Filters

NOVA LIVE CENTRE 2MT

NOVA LIVE CENTRE 2MT

R595,00 incl VAT
2MT Center, suitable for all lathes with a 2MT tailstock Heavy duty bearings for long life Point for strong work holding Precise machined medium tensile carbon steel Standard equipment on all NOVA lathes
- +
Manufacturer: Nova
Availability: In stock
SKU: WA2MTLC
Manufacturer part number: 2MTLC
  • Fits all lathes with 2MT tailstock
  • Fast, precise and powerful tailstock support system
  • Versatile. Over 6 functions in the 1 unit
  • Quick change tapers for quick mounting of center pieces
  • Hollow body for drilling through the center
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Picture of RECORD SPUR CENTRE

RECORD SPUR CENTRE

TA62811
This useful centre is held in the chuck with the 50 mm standard jaws to give a quick-mount solution for spindle turning, meaning the chuck need not be removed from the lathe.
R405,00 incl VAT
STANLEY 199E TRIMMING KNIFE SOUTH AFRICA

STANLEY 199E TRIMMING KNIFE

HT10199
Overlapping nose blade locking system for greater safety during cutting Strong zinc alloy body with a grooved surface for comfortable, assured grip Blade holder inside the handle for safe storage Knife supplied with 3 blades
R175,00 incl VAT
Nova Faceplate 6" (150mm) South Africa

NOVA FACEPLATE 6" (150MM) 1 1/4" 8TPI

WAFP150
Standard equipment in the popular NOVA 2024 lathe. Also available as an accessory for other lathe users with 1 1/4″ x 8TPI thread. This faceplate also fits all lathes that have a 1 1/4″x 8TPI spindle thread. Ideal tool for mounting larger, out of balance and/or heavier work for added security. Plated to ensure long life, even when turning green wood. It features 8 fastening points for ultra secure holding.
R775,00 incl VAT
TORK CRAFT 270MM HSS WOODTURNING CHISEL SET SOUTH AFRICA

TORK CRAFT 270MM HSS WOOD TURNING CHISEL SET

TA10006
Chisel set used for carving shapes into wood or change the thickness on wood on a certain area
R990,00 incl VAT
CHESTNUT 500ML ACRYLIC SANDING SEALER SOUTH AFRICA

Chestnut 500ml Acrylic Sanding Sealer

PASSEAL
This water-based sanding sealer gets the job done without the smell associated with solvent-based sealers and also with no flammability issues – ideal for asthma suffers and anyone with an aversion to solvent-based finishes. Applied by cloth, brush or spray (our Foam Brushes are especially good with this) the sealer dries in about 5 minutes and can be overcoated with most compatible finishes after about 20 minutes although two hours should be left if using Acrylic Lacquer. Acrylic Sanding Sealer sands easily with a fine abrasive and is supplied ready for use.
R250,00 incl VAT R100,00 incl VAT
CHESTNUT 225ML CUT 'N' POLISH SOUTH AFRICA

Chestnut 225ml Cut 'n' Polish

PACUTPO
Cut’n’Polish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay ‘wet’ slightly longer during the application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere. On bare wood; sand to 240 grit as normal, apply a coat of Cut’n’Polish with the lathe stopped, then switch on the lathe and buff to a soft sheen whilst smoothing the timber at the same time. On sealed wood apply after the sealer, in the same way, polishing to a slightly higher shine. Cut’n’Polish dries almost immediately and can be overcoated with Friction Polish or any of our waxes for a higher shine.
R430,00 incl VAT Temp out of stock - R172,00 incl VAT