Close
Filters

NOVA INSERT CHUCK IDNS - RH 1" X 8TPI UNC

NOVA INSERT CHUCK IDNS - RH 1" X 8TPI UNC

R395,00 incl VAT
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.
- +
Manufacturer: Nova
Availability: In stock
SKU: WA-IDNS
Manufacturer part number: IDNS
  • Adapts any NOVA chuck to almost any lathe spindle at low cost.
  • The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system to ensure maximum adaptability and flexibility for the user.

HOW DOES THE INSERT SYSTEM WORK?

The insert fits into the back of the chuck and onto your lathe headstock spindle. We have the largest range of inserts to fit many different popular lathe models.

The inserts are threaded both inside and out. The outside thread is made to fit into the NOVA Chucks. The inside thread comes in a variety of sizes, which one you need will depend on what lathe you have.

See the insert thread listing below for more details. If you are not sure what lathe thread you have, see our FAQ on how you can identify this thread in our support page.

Refer to the list of insert/adaptors that we manufacture. Check with us if your lathe is not listed, we update our inserts from time to time.
Some thread sizes we direct thread into the chuck body – as such, these do not require insert/adaptors. A directly threaded chuck body cannot be altered to an insert type body or another thread size once threaded, so it pays to be sure that your lathe thread size is not covered by the insert/adaptors first!

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Nova Chuck Supernova 2 Insert Version South Africa

NOVA CHUCK SUPERNOVA 2 INSERT VERSION

WA23055
Suitable for a wide variety of lathes with up to 20″ swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2″ Jaws come standard. Powerful patented Tuff Lock gearing with precise, hardened action. Delivers incredibly smooth strength for a solid, vibration free performance. You’ll find yourself turning longer, more delicate stems. Large, uneven and rough work that you couldn’t handle before can be turned with greater security. Takes the same accessory range as other NOVA chucks. Insert Type Chuck, requires additional insert adaptor to fit to lathe. The SuperNOVA2 also comes in a direct thread suitable for EU market, M33x3.5 • Powerful and fast Tuff Lock geared action • Unique tilt away T-bar handle for easy and convenient access • Composite indexing backing plate reinforced with stranded glass fibers for extra strength • Fits full range of NOVA chuck accessories • Special NOVA wood turning profile on jaws to cut into and grip wood fibers firmly • Precision machined from solid steel • 4-jaws lock down solidly THIS SUPANOVA 2(COMPLETE) CHUCK IS THE “INSERT VERSION”. PLEASE ENSURE THAT YOU SELECT THE CORRECT INSERT THAT MATCH THE THREAD OF YOUR PARTICULAR LATHE.
R3 950,00 incl VAT
Nova Gauge Chuck 10 in 1 South Africa

NOVA GAUGE CHUCK 10 IN 1

WA10051
Quickly and easily work out your dovetails accurately Contains many of the useful measuring and gauging functions used in the wider workshop Strong and durable materials Over 10 handy measuring and gauging functions 2-Year Warranty
R300,00 incl VAT
CHESTNUT 500ML FRICTION POLISH SOUTH AFRICA

Chestnut 500ml Friction Polish

PACNFP5
Friction Polish is a shellac-based polish ideal for creating a high gloss finish on or off the lathe. It’s a great decorative finish and is ideal for small items but can be difficult to apply to larger items on the lathe (over about 8-inch diameter). The high amount of shellac in Friction Polish does two main things. Firstly it helps seal bare wood and give it a great shine, which is good. Sadly the price of this commodity shot up a few years ago when the shellac crop failed and it never went back down, meaning that the cost of the polish has also risen sharply. Nevertheless, Friction Polish remains one of the most popular finishes for turners. It can be applied to bare wood but is normally used over a sealer and any of the sealers in the Chestnut Products range are suitable for this. Applied with the lathe running it dries almost instantly and builds to a deep, rich shine very quickly. Avoid using too much as this can cause ‘rings’ to appear on the surface. Friction Polish can be applied off the lathe with great success, using it like a French-Polish and rubbing it into the surface. This does require a large amount of elbow grease (sadly not something we supply) but the end result is well worth the effort!
R575,00 incl VAT
CHESTNUT 225ML CUT 'N' POLISH SOUTH AFRICA

Chestnut 225ml Cut 'n' Polish

PACUTPO
Cut’n’Polish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay ‘wet’ slightly longer during the application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere. On bare wood; sand to 240 grit as normal, apply a coat of Cut’n’Polish with the lathe stopped, then switch on the lathe and buff to a soft sheen whilst smoothing the timber at the same time. On sealed wood apply after the sealer, in the same way, polishing to a slightly higher shine. Cut’n’Polish dries almost immediately and can be overcoated with Friction Polish or any of our waxes for a higher shine.
Call for pricing
Nova Chuck Jaws Mini Spigot South Africa

NOVA CHUCK JAWS MINI SPIGOT

WA-6026
Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes Same jaw fixing system across all NOVA Chuck models - total system interchangeability Long nose jaws allow for a very powerful spigot grip for smaller work
R920,00 incl VAT
Nova Chuck G3 Insert Version South Africa

NOVA CHUCK G3 INSERT VERSION CHUCK

WA48202
NOVA G3 WOODTURNING CHUCK •Powerful and fast Tuff Lock geared action for smaller lathes •Convienient one handed operation with T bar handle – more time turning, less time preparing •Open back for easy cleaning and to reduce weight on smaller lathe spindles •4-Jaws Lock down solidly •Fits full range of NOVA Chuck Accessories •Special NOVA Wood turning profile on Jaws to cut into and grip wood fibres firmly •Precision machined from solid steel Its light weight, and with less overhang which is perfect for smaller lathe spindles. The small 1.79″ body length delivers less overhang from the spindle than the larger geared Chucks – the SuperNova2 Chuck and the Nova Titan Chuck, reducing stress on smaller lathe spindles. THIS IS THE “INSERT VERSION” CHUCK.PLEASE ENSURE THAT YOU SELECT THE CORRECT INSERT THAT MATCH THE THREAD OF YOUR PARTICULAR LATHE.
R2 850,00 incl VAT