Close
Filters

NOVA DRILL CHUCK 1/2" 2MT

NOVA DRILL CHUCK 1/2" 2MT

R715,00 incl VAT
Our new NOVA 1/2″ Drill Chuck is a precision chuck for use with our NOVA Wood lathes and NOVA DVR Drill Presses. Perfect drill chuck accessory for NOVA Lathes, or any lathe or drill press with a 2MT spindle. It can hold 1/6 inches/1.58mm through to 1/2inch/12.7mm.
- +
Manufacturer: Nova
Availability: In stock
SKU: WA-9018
Manufacturer part number: 9018

Perfect drill chuck accessory for NOVA Lathes, or any lathe or drill press with a 2MT spindle.

  • It can hold 1/6 inches/1.58mm through to 1/2inch/12.7mm.
  • Can be used for grabbing small turning or pen mandrels on the headstock of your NOVA lathe.
  • Use with a drill bit in the tailstock of your NOVA lathe.
  • Use with NOVA Voyager Drill Press or other Drill Presses.
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Picture of TOOLMATE SLIMLINE GOLD PEN KIT (BLACK STRIPE)

TOOLMATE SLIMLINE GOLD PEN KIT (BLACK STRIPE)

WAGBBP5
The pen is easy to make and would suit beginners to pen turning. Recommended blank size: 20mm X 20mm x 140mm Skill Level: Beginners Tools required for turning this pen: • Turing chisel i.e. Robert Sorby • Wood Lathe i.e. JET or NOVA • Pen Mandrel MT1 OR MT2 – Depending on which fits your lathe • Mandrel saver – Saves your pen mandrel from bending and saves your live centre from damaging point. • Sierra Pen Kit • 7mm drill bit • 6.18mm Barrel trimmer • Pen vice and pen assembly press (Optional) • Epoxy glue – to glue barrel to blank • Cyanoacrylate glue – SQ to hold burl wood blank together and MQ to finish pen (Optional) • Sandpaper i.e. Klingspor Dry paper
Temp out of stock - R45,00 incl VAT
Picture of PRO BOND EPOXY BASE AND PRO BOND ACTIVATOR

PRO BOND EPOXY BASE AND PRO BOND ACTIVATOR

PAEA012
Temp out of stock - R375,00 incl VAT
Nova Chuck Jaws Pen Jaws South Adrica

NOVA CHUCK JAWS PEN JAWS

WA-6034
NOVA Pen ‘Plus’ Jaws easily convert your NOVA chuck into a fast and accurate pen blank drilling facility. The big jaw profile provides a vibration free, solid grip for all sizes of pen blanks and an accurate centered hole every time. Being able to finely control the drill feed on the lathe is a big advantage to prevent break out on those delicate pen walls. Also perfect for squaring up the pen blank ends after gluing in the pen kit tubes.
R1 045,00 incl VAT
Nova Live Centre System South Africa

NOVA LIVE CENTRE SYSTEM

WA-5015
This precision machined live center features a triple bearing construction for heavy duty use and long life. Hollow center design makes it capable of accepting a 5/16" shell Auger for lamp stand boring. Threaded center has a 5/16" bolt so it can act as an arbor to mount a variety of projects and a miniature reverse cone function to centerless mount miniature round turnings (e.g. lace bobbins) up to 12mm (0.47"). All separate centers that fit into the Nova Live Center have a 2MT taper so they can be directly mounted to 2MT Tailstock spindle. The Nova Live Center System includes a large stepped cone able to handle centerless rounds up to 40mm (over 1-1/2"), a stepped cone that can be reversed to wedge fit hollow sections from 26mm (1") to 32mm (1-1/4"), and a threaded center with a screw that can mount special wooden supports.
R1 775,00 incl VAT
Nova Chuck G3 1" 8TPI Reversible South Africa

NOVA CHUCK G3 1" 8TPI REVERSIBLE

WA48232
NOVA G3 Wood Turning Direct Threaded 1″ x 8TPI LH/RH is a 4 Jaw self centering reversible geared chuck, designed for the NOVA Comet II Mini Lathe. With unique NOVA features such as Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2″ Jaws as standard, this chuck is fully featured. Powerful Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance. Takes the same accessory range as other NOVA Chucks. Direct threaded 1″x 8TPI RH/LH. Enhanced Jaw Gearing and Reverse Lock features that ensure this NOVA G3 Comet II Reversible chuck will remain engaged and locked on the spindle for use in forward and reverse. THIS G3 CHUCK IS NOT THE ”INSERT VERSION” BUT HAS A 1”X 8TPI UNC THREAD MACHINED IN THE BODY. IT WILL FIT DIRECTLY ON THE HEADSTOCK OF LATHES WITH A SIMILAR THREAD.
R2 850,00 incl VAT
Nova Chuck Jaws Soft Plastic South Africa

NOVA CHUCK JAWS SOFT PLASTIC

WA-6021
Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also allows nearly full diameter contact with the workpiece, since you can turn out to the exact diameter required. Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also allows nearly full diameter contact with the workpiece, since you can turn out to the exact diameter required. Features: •Nylon can be turned to shape using standard tools. They can be turned, sawn, drilled or tapped. •Because they are made of nylon, they hold most woods without marking. •Vibrant red color makes it easy to see profiles. By machining the profile after mounting, you can eliminate any errors that may have added up from mounting the jaws to the chuck, then to the spindle. •Maximum contact with workpiece. Near full diameter contact is achievable, since you can turn out to the exact diameter required. •Thick jaw body lets user profile any shape they wish, limited only by the fastening heads, which are embedded 22.5mm from the face of the jaws. •Outer ring diameter when closed: 120mm (4.7"). •Thickness: 27mm (1"). Tips for customizing the soft jaws: •It is recommended to use a scraper that is about 1/2" wide, with an end that is 90° to the side of the scraper. It will cut on both sides and on the end. •Recommended bevel angle is about 70 degrees. •When scraping nylon, the tool rest must be as close to the work as possible and you must always use a light touch. •Run your lathe at a speed between 1700 and 2000 rpm for best cutting. •You must take extra care when machining the jaws so as not to hit to hit the screw heads. Features standard on all Nova Jaws: •Nova chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models. •All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations. •Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.
R425,00 incl VAT