Close
Filters

NOVA CHUCK JAWS SOFT PLASTIC

NOVA CHUCK JAWS SOFT PLASTIC

R430,00 incl VAT
Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also allows nearly full diameter contact with the workpiece, since you can turn out to the exact diameter required. Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also allows nearly full diameter contact with the workpiece, since you can turn out to the exact diameter required. Features: •Nylon can be turned to shape using standard tools. They can be turned, sawn, drilled or tapped. •Because they are made of nylon, they hold most woods without marking. •Vibrant red color makes it easy to see profiles. By machining the profile after mounting, you can eliminate any errors that may have added up from mounting the jaws to the chuck, then to the spindle. •Maximum contact with workpiece. Near full diameter contact is achievable, since you can turn out to the exact diameter required. •Thick jaw body lets user profile any shape they wish, limited only by the fastening heads, which are embedded 22.5mm from the face of the jaws. •Outer ring diameter when closed: 120mm (4.7"). •Thickness: 27mm (1"). Tips for customizing the soft jaws: •It is recommended to use a scraper that is about 1/2" wide, with an end that is 90° to the side of the scraper. It will cut on both sides and on the end. •Recommended bevel angle is about 70 degrees. •When scraping nylon, the tool rest must be as close to the work as possible and you must always use a light touch. •Run your lathe at a speed between 1700 and 2000 rpm for best cutting. •You must take extra care when machining the jaws so as not to hit to hit the screw heads. Features standard on all Nova Jaws: •Nova chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models. •All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations. •Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.
- +
Manufacturer: Nova
Availability: In stock
SKU: WA-6021
Manufacturer part number: 6021

• Recommended for power workholding on lathes up to 400mm/14” diameter swing.
• Up to 350mm/14″ diameter bowls using 50mm/2” Jaws (supplied with chuck)
• Up to 50mm/2″ length spigots (using 50mm/2” Jaws (supplied with chuck)
• Full Packaged Weight (Std) 1.4kgs/3.1lbs.

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Robert Sorby Finishing Sandmaster South Africa

ROBERT SORBY SANDMASTER

TA-W410
The Sandmaster is an essential part of every turner's tool kit. It comes with 5 different grits of abrasive to take even the roughest projects to a glass-like finish every time, avoids an uneven finish often associated with hand sanding and there is no danger of catching hands on the revolving project. There is little or no surface damage/head build-up, as there is with power sanding and there is no cable to trip over. Head articulates to access even the most difficult areas. Sponge head is ideal for working in tight spaces. Sandmaster creates a fraction of the dust generated by power sanding. It can be adapted to take a polishing mop.
Temp out of stock - R1 250,00 incl VAT
Picture of RECORD PEN JAW

RECORD PEN JAW

TA62337
These jaws are fantastically effective for drilling pen blanks. They eliminate the need for a drill press and offer much more accurate results and the deep grip to all four sides ensures incredible holding power. Drilling on the lathe means the feed speed of the drill bit is under your complete control, meaning a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects as in addition to their strong grip, the work piece is moved forward from the chuck, allowing greater access
Temp out of stock - R1 010,00 incl VAT
Nova Chuck Jaws 130mm South Africa

NOVA CHUCK JAWS 130MM

WAS13ON
Designed for expanded dovetail, reverse dovetail for gripping footed bowls Perfect for larger bowls, up to 29″ in diameter Same jaw fixing system across all NOVA Chuck models – total system interchangeabilty Ideal for use with center saving systems 2-Year Warranty
R1 250,00 incl VAT
Picture of NOVA CHUCK SPUR CENTRE 19MM

NOVA CHUCK SPUR CENTRE 19MM

WA-NCSC
NOVA NCSC Chuck Spur Centre Accessory is an accessory for NOVA Chucks. Enables you to keep your NOVA Chuck on your lathe while you do spindle work. Designed for the bowl turner who does occasional spindle work, this accessory can be quick mounted into your NOVA Chuck and can carry out spur center functions. With solid 4 prongs to dig into wood.
R530,00 incl VAT
Nova Chuck Jaws 70mm South Africa

NOVA CHUCK JAWS 70MM

WAJS70N
The NOVA JS70N 70mm (2.75″) Chuck Accessory Jaw Set is perfect for bowl and spigot projects. Designed for expanded dovetail and reverse dovetail holds, for gripping footed bowls. •Special NOVA dovetail profile, designed to maximum strength and holding in woodturning, without crushing wood fibers. •All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes •Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. CHUCK NOT INCLUDED (FOR DISPLAY PURPOSES ONLY).
R1 200,00 incl VAT
Nova Chuck Jaws 100mm South Africa

NOVA CHUCK JAWS 100MM

WAJS100
The NOVA JS100N is one of our most popular chuck accessories to mount 12-14″ bowls. Mount customized false wooden jaws and the customized jaws can be made for special purposes. They are built with a turning dovetail profile to maximize strength without jeopardizing wood fibers, and can hold both in contraction and expansion modes. High tensile 1045 steel makes up the JS100N for precise closing, durability, and a long life. Comes with 4 jaw segments and instructions. Uses the standard fasteners that come with your NOVA Chuck.
R1 200,00 incl VAT