Close
All Categories
    Filters
    Preferences
    Search

    Lathes

    You can get great quility accessories for your lathe. Everything from chucks, live centres, tool rest, insert chucks, jaws to faceplates and adaptors.

    View as Grid List
    Sort by
    Display per page

    Record Mini Spigot Chuck Jaws 13mm Bore

    TA62336
    Call for pricing
    To complement the new pin jaws, the mini spigot jaws have also been improved. These jaws perform many of the same tasks in expansion and the extra screw hole profiles and added teeth to the outside provide tremendous grip for when this area will not be visible in the finished work piece. This set has been given a 13 mm internal diameter, making it ideal for turning strong spigots on knobs and handles, again adding to their versatility.

    Record Chuck SC3 Chuck 3/4" X 16 Thread, 50mm Jaw, Woodscrew & 2" Faceplate 61064 Package

    TA61064
    Call for pricing
    The SC3 chuck is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines and is still compatible with the full jaw range. The compact design reduces load on the lathe spindles and bearings and gives good access to smaller work pieces. The large jaw slides offer unrivalled strength and holding power that cannot be found in other chucks of this size. Supplied complete with the woodworm screw and 50 mm standard jaws, this package offers unrivalled value. Includes: SC3 Geared Scroll Chuck

    Record Pen Jaw

    TA62337
    Call for pricing
    These jaws are fantastically effective for drilling pen blanks. They eliminate the need for a drill press and offer much more accurate results and the deep grip to all four sides ensures incredible holding power. Drilling on the lathe means the feed speed of the drill bit is under your complete control, meaning a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects as in addition to their strong grip, the work piece is moved forward from the chuck, allowing greater access

    Record Standard Chuck Jaws 35mm

    TA62321
    Call for pricing
    These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for smaller spigots and recesses, this set is incredibly versatile and makes a great addition to any turner’s tool collection.

    Nova Chuck Titan 3 M33

    TA13061
    R7 000,00 incl VAT
    Our largest and most powerful chuck in the NOVA chuck range. Also, one of our most versatile chucks. Delivers superior holding power for BIG projects with 3 fixing screws for each jaw.Capable of handling much larger work than the SuperNova2. Compatible with all Nova Standard chuck jaw sets (except Infinity). Fully sealed backing plate, Titan III PowerGrip jaws and Woodworm Screw included. Direct Threads only (1 1/4″ 8TPI or M33). Extra long, precision hardened jaw slides with safety stop and featuring 3 screw positions for added security. Fast adjustment and powerful grip with precise hardened geared action. Ball nose, comfort grip handle locks positively and quickly into pinion. Largest range of accessories on the market. Fully compatible with NOVA standard chuck jaws and accessories plus two optional large, heavy duty bowl jaws with wide face and deep grip. Especially designed for large turning projects.

    Toolmate Spur Drive Centre 4-Prong MT1 W/Split Blades 5/8"

    TA58MT1
    R215,00 incl VAT
    Toolmate Spur Drive Centre 4-Prong MT1 W/Split Blades 5/8"

    Jet Mini Lathe 4 Toothed Drive Cent MT2

    SP70833
    R590,00 incl VAT
    Fits into the hollow spindle on the headstock of any lathe .

    Jet Wood Lathe JWL-1220 Stand Extension

    TA1220E
    R1 200,00 incl VAT
    Square tubing extension for the basic machine stand

    Toolmate Live Centre 1MT 1-1/4" Diameter

    TA114MT
    R520,00 incl VAT
    Toolmate Live Centre 1MT 1-1/4" Diameter

    Jet Mini Lathe Live Centre MT2

    SP78331
    R595,00 incl VAT
    Metal revolving live centre that fits in the tailstock of any lathe.

    Jet Mini Lathe Tool Rest

    SP-42TR
    R357,97 incl VAT
    Cast iron toolrest for Jet 1014 mini lathe-150 mm (6”)wide with 16mm (5/8”)stem.

    Laguna Tools 58″ Steel Bed

    TA-VO18
    R14 999,00 incl VAT
    Extends the spindle-turning capacity from 36″ to 94″. VNB : Requires support leg, not included.

    Laguna Tools Halogen Light With Transformer 220V

    TALIGHT
    Call for pricing
    220-volt Halogen Floodlight with a long articulating arm.

    Laguna Tools Deluxe Wheel System

    TAWHEEL
    R16 000,00 incl VAT
    The Wheel System is designed for the REVO 12|16, 18|36 and 24|36, allowing maximum stability by letting the REVO to only sit on the four pads when in use. When moving the REVO, all four swiveling casters are engaged. Dual Gas Struts make raising & lowering ultra smooth.

    Laguna Lathe Attachment 12" Swing-Away Extension

    TAO1820
    R10 999,00 incl VAT
    This handy steel bed extension allows you to swing your tail-stock out of the way when it's not needed, which will be eliminating the pain and hassle of lifting your tail-stock on and off the lathe. As an added bonus, it also adds 12" to your between centers working distance.

    Laguna Tools Cast Iron Leg

    TA-CAST
    R6 799,00 incl VAT
    Cast Iron Support Leg is supplied with foot-pads. Works in conjunction with Steel Bed

    Nova Sharpening Fingernail Jig

    TA35053
    Call for pricing
    NOVA 35053 Finger Grind Jig uses a true track ball and socket for precise arc movements. Making it easy to check the grind visually and enables the user to ‘feel’ the grind. With one of the best measure and setting methods on the market, the NOVA 35053 Finger Grind Jig is notched with handy scales throughout, to easily and quickly find your favorite grinds. The Finger Grind Clamp with its enormous capacity is available for large chisels up to 1″. Fits 6″ and 8″ bench grinders. Includes extruded aluminium base, finger grind unit, fasteners and instruction manual.

    Nova Handwheel DVR/1624

    SPN-LHB
    R1 180,00 incl VAT
    The NOVA Handwheel is used on the outboard end of the headstock spindle. It can be used to position work by hand or to slow down the spindle by hand once the lathe is switched off. Made from precision machined solid 1045K steel for extra strength and rigidity. A custom wooden handwheel can be designed by the user to insert this handwheel into for extra comfort. It can used on all stardard nova lathes.

    Nova Insert Chuck IHNS - RH 3/4" 10 UNC

    WA-IHNS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck LINS - RH M24 X 3

    WA-IINS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck IKNS - Rh M18 X 2.5

    WA-IKNS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck ILNS 1 1/4" 8 UNS RH DVR

    WA-ILNS
    Call for pricing
    Adapt your Insert Type NOVA chuck to a 1 1/4″ 8TPI UNS RH lathe. Allows you to keep the same chuck and accessories if you change your lathe. You only need to change the insert/adaptor. The internal thread is 1 1/4″ 8TPI UNS RH and the external thread matches the NOVA insert type chucks to simply and easily screw into the back of your NOVA Insert Type Chuck. Now your NOVA insert type chuck is ready to attach to your 1 1/4″ 8TPI UNS RH threaded lathe spindle.

    Nova Insert Chuck INNS - Blank Cut To Thread

    WA-INNS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck IQNS - M30 X 3.5 RH

    WA-IQNS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck IVNS - 7/8" 14TPI UNF RH

    WA-IVNS
    R495,00 incl VAT
    • Precision machined from 1045 High Tensile Steel • Genuine NOVA product • Fits all NOVA Insert Type Chucks for maximum flexibility and adaptability • Quickly and inexpensively adapt your NOVA chuck to almost any lathe depending on insert thread size

    Nova Insert Chuck IYNS - 1 1/4" 8TPI UNS RH

    WA-IYNS
    Call for pricing
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck 1" X 8TPI To M33X3.5 Comet Ii Adaptor

    WA-6047
    R770,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.

    Nova Insert Chuck ICNS - 1" X 10TPI

    WACCINC
    R345,00 incl VAT
    Adapt your Insert Type NOVA Chuck to a 1″ 10TPI RH BSF lathe. Allows you to keep the same chuck and accessories if you change your lathe. You only need to change the insert/adaptor. The internal thread is 1″ 10TPI RH and the external thread matches the NOVA insert type chucks to simply screw in. Then your NOVA insert type chuck is ready to attach to your 1″ 10TPI RH threaded lathe spindle. NOVA Insert Type Chucks include: G3 (SKU 48202) and SuperNOVA2 (23055). Use only genuine NOVA accessories and parts with your NOVA chucks.

    Nova Insert Chuck IXNS - 1" X 8TPI Reversable

    WA-IXNS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck I3NS - M20X1.5

    WA-I3NS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck ISNS - 5/8" Bore Shopsmith

    WA-ISNS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck I9Ns - 3/4 16Tpi 6Mm Register

    WA-I9NS
    Call for pricing
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck ICNS -RH 1" X 10 TPI BSF 1

    WA-ICNS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck IDNS - RH 1" X 8TPI UNC

    WA-IDNS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Insert Chuck LENS - 1" X 12TPI UNF

    WA-IENS
    R495,00 incl VAT
    NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally, and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe. NOVA has the widest range of insert/adaptors of any chucking system, giving you maximum flexibility.

    Nova Chuck Cole Jaw Woodworm Screw

    WA-WWCJ
    R450,00 incl VAT
    Use this dedicated Woodworm Screw for inboard, righthand screw chucking with the Nova Cole Jaws (#45174 and #45274, sold separately). Features a longer screw, which enables the threads to protrude past the Cole Jaw segments. The screw has a deep thread that is machined right to the end, allowing an easy lead into the wood. The depth of the thread and core size makes for a secure grip, even with larger turning blanks. Features: • Quick and easy method to mount unformed small bowl blanks • Provides a secure mounting to form the outside of bowls • 10.5mm thread requires a hole about 8mm (5/16") in diameter • The screw has considerable holding power and it is sometimes difficult to unscrew, so wax or oil the thread before mounting your blank

    Nova Lathe Outrigger Unit 1624

    WAOR300
    Call for pricing
    Adds 29″/740mm swing capacity to your outboard Solid Cast Iron Vibration dampening Quick to add, remove or move out of the way For NOVA DVR XP, DVR Saturn and 1624 Lathes

    Nova Chuck Woodworm Screw

    WA10006
    R515,00 incl VAT
    Comes standard with most NOVA Chucks. It’s also available as a separate purchase. Quick and easy method to mount small bowls blanks. It provides a secure mounting to form the outside of bowls. Strong thin edged thread form design to cut into wood and hold on. Square shank for strong and positive location into the chuck body. Suitable for NOVA Chucks.

    Nova Chuck Live Centre Adaptor 1 1/4" 8TPI

    TA-5016
    Call for pricing
    Suitable for all lathes with a 2MT tailstock Fits all NOVA insert type Chucks and all NOVA lathes 1 1/4″8TPI RH Thread Precise machined medium tensile carbon steel Quick mounting

    Nova Chuck G3 M33 Version

    WA48201
    R3 050,00 incl VAT
    Recommended for power workholding on lathes up to 400mm/14” diameter swing. •Up to 350mm/14″ diameter bowls using 50mm/2” Jaws (supplied with chuck) •Up to 50mm/2″ length spigots (using 50mm/2” Jaws (supplied with chuck) •Full Packaged Weight (Std) 1.4kgs/3.1lbs. THIS G3 CHUCK IS NOT THE ”INSERT VERSION” BUT HAS AN M33X3.5 THREAD MACHINED IN THE BODY. IT WILL FIT DIRECTLY ON THE HEADSTOCK OF LATHES WITH A SIMILAR THREAD.

    Nova Chuck G3 1" 8TPI Reversible

    WA48232
    R3 050,00 incl VAT
    NOVA G3 Wood Turning Direct Threaded 1″ x 8TPI LH/RH is a 4 Jaw self centering reversible geared chuck, designed for the NOVA Comet II Mini Lathe. With unique NOVA features such as Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2″ Jaws as standard, this chuck is fully featured. Powerful Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance. Takes the same accessory range as other NOVA Chucks. Direct threaded 1″x 8TPI RH/LH. Enhanced Jaw Gearing and Reverse Lock features that ensure this NOVA G3 Comet II Reversible chuck will remain engaged and locked on the spindle for use in forward and reverse. THIS G3 CHUCK IS NOT THE ”INSERT VERSION” BUT HAS A 1”X 8TPI UNC THREAD MACHINED IN THE BODY. IT WILL FIT DIRECTLY ON THE HEADSTOCK OF LATHES WITH A SIMILAR THREAD.

    Nova Chuck G3 Insert Version Chuck

    WA48202
    Call for pricing
    NOVA G3 WOODTURNING CHUCK •Powerful and fast Tuff Lock geared action for smaller lathes •Convienient one handed operation with T bar handle – more time turning, less time preparing •Open back for easy cleaning and to reduce weight on smaller lathe spindles •4-Jaws Lock down solidly •Fits full range of NOVA Chuck Accessories •Special NOVA Wood turning profile on Jaws to cut into and grip wood fibres firmly •Precision machined from solid steel Its light weight, and with less overhang which is perfect for smaller lathe spindles. The small 1.79″ body length delivers less overhang from the spindle than the larger geared Chucks – the SuperNova2 Chuck and the Nova Titan Chuck, reducing stress on smaller lathe spindles. THIS IS THE “INSERT VERSION” CHUCK.PLEASE ENSURE THAT YOU SELECT THE CORRECT INSERT THAT MATCH THE THREAD OF YOUR PARTICULAR LATHE.

    Nova Chuck Supernova 2 Insert Version

    WA23055
    R4 050,00 incl VAT
    Suitable for a wide variety of lathes with up to 20″ swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2″ Jaws come standard. Powerful patented Tuff Lock gearing with precise, hardened action. Delivers incredibly smooth strength for a solid, vibration free performance. You’ll find yourself turning longer, more delicate stems. Large, uneven and rough work that you couldn’t handle before can be turned with greater security. Takes the same accessory range as other NOVA chucks. Insert Type Chuck, requires additional insert adaptor to fit to lathe. The SuperNOVA2 also comes in a direct thread suitable for EU market, M33x3.5 • Powerful and fast Tuff Lock geared action • Unique tilt away T-bar handle for easy and convenient access • Composite indexing backing plate reinforced with stranded glass fibers for extra strength • Fits full range of NOVA chuck accessories • Special NOVA wood turning profile on jaws to cut into and grip wood fibers firmly • Precision machined from solid steel • 4-jaws lock down solidly THIS SUPANOVA 2(COMPLETE) CHUCK IS THE “INSERT VERSION”. PLEASE ENSURE THAT YOU SELECT THE CORRECT INSERT THAT MATCH THE THREAD OF YOUR PARTICULAR LATHE.

    Nova Chuck Supernova 2 M33 Version

    WA23062
    R4 050,00 incl VAT
    • Quality Materials. • Precision Machining. • Common Accessory Jaw Fixing Profile – compatible across all NOVA chucks and accessories. • High Tech Precision Composite Jaw Slides. • Special Woodturning Dovetail Profile on Jaws. • Auto Safety Stop Feature. Jaw slides can’t protrude past the chuck body. • Comprehensive Instructions. • Common Insert/Adaptor Fitting – compatible across all NOVA chucks. • Safe Lock™ Woodworm Screw. • 2 Years Warranty THIS SUPANOVA2 (COMPLETE) CHUCK IS NOT THE ”INSERT VERSION” BUT HAS AN M33X3.5 THREAD MACHINED IN THE BODY. IT WILL FIT DIRECTLY ON THE HEADSTOCK OF LATHES WITH A SIMILAR THREAD

    Nova Chuck Supernova 2 Chuck Body Only Insert Version

    WA23067
    R3 350,00 incl VAT
    Suitable for a wide variety of lathes with up to 20″ swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides and Comfortable T Bar Handle. Powerful patented Tuff Lock gearing with precise, hardened action. Delivers incredibly smooth strength for a solid, vibration free performance. You’ll find yourself turning longer, more delicate stems. Large, uneven and rough work that you couldn’t handle before can be turned with greater security.Takes the same accessory range as other NOVA chucks. Insert Type Chuck, requires additional insert adaptor to fit to lathe. NOTE: This version is the body only version for those wanting a second chuck. This version doesn’t come with any accessory jaws. For a fully configured version, you’ll need 23055. • Powerful and fast Tuff Lock geared action • Unique tilt away T-bar handle for easy and convenient access • Composite indexing backing plate reinforced with stranded glass fibers for extra strength • Fits full range of NOVA chuck accessories (Note: Does not come with accessory jaws) • Precision machined from solid steel • 4-jaws lock down solidly • 6-year full replacement warranty THIS SUPANOVA 2(BODY ONLY) CHUCK IS THE “INSERT VERSION”. PLEASE ENSURE THAT YOU SELECT THE CORRECT INSERT THAT MATCH THE THREAD OF YOUR PARTICULAR LATHE. THIS SUPANOVA 2(BODY ONLY) CHUCK IS THE “INSERT VERSION”. PLEASE ENSURE THAT YOU SELECT THE CORRECT INSERT THAT MATCH THE THREAD OF YOUR PARTICULAR LATHE.

    Nova Chuck Supernova 2 Chuck Body Only M33 Thread

    WA23073
    R3 350,00 incl VAT
    THIS SUPANOVA2 (BODY ONLY) CHUCK IS NOT THE ”INSERT VERSION” BUT HAS AN M33X3.5 THREAD MACHINED IN THE BODY. IT WILL FIT DIRECTLY ON THE HEADSTOCK OF LATHES WITH A SIMILAR THREAD.

    Nova Chuck Jaws 50Mm

    WAJS50N
    R880,00 incl VAT
    NOVA JS50N 50mm (2″) Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck* for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA JS50N 50mm (2″) Chuck Accessory Jaw Set comes standard with most NOVA Chucks, providing a versatile jaw to get you started, before moving onto more specialized jaws. These are able to handle both bowl and spigot projects. With a special NOVA Wood Turning Dovetail Profile, designed specifically for maximum strength and holding in Wood Turning, without crushing the wood fibers. These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 High Tensile Steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions. Uses the standard fasteners that come with your NOVA Chuck. Backed by a full replacement 2-year warranty, *Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use. CHUCK SHOWN FOR DISPLAY PURPOSES ONLY. CHUCK NOT INCLUDED.

    Nova Chuck Jaws Pin

    WAJSPIN
    Call for pricing
    The NOVA JSPIN Pin Accessory Chuck Jaw set have a long nose, designed to act like a pin chuck – expanding into a pre-bored hole, a very useful technique for free form edged bowls. You don't have to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins. They are also ideal for longer dowel work. Twist drils can also be gripped to enable the chuck to be used as a drill chuck. The jaw set features a small dovetail to mount small bowls. • Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres. • All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes • Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change) – giving you maximum system interchangeability and flexibility. • Designed to act like a Pin Chuck – expanding into a pre-bored hole.

    Lathes

    Filter by:

    Clear All
    Min: R40,00 Max: R16 000,00
    R40 R16000