Close
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Laguna Tools

    Laguna Tools Revo 24|36 Lathe 220 Volt

    Call for pricing
    The First feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe.The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well-known longevity & strength.Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle. The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.
    SKU: WM43620
    Manufacturer part number: EVO2436-220
    GTIN: WM43620
    Availability: Out of stock
    Manufacturer: Laguna Tools
    Availability: Out of stock
    SKU: WM43620
    Manufacturer part number: EVO2436-220
    GTIN: WM43620

    The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength.Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically.

     

    Features

    VFD: Delta S1 Variable Frequency Drive

    Remote Control Box With Speed Settings

    Two Ergonomic Control Panel Positions: High/Low

    Tailstock Quill: 4½”, Engraved, Self-Ejecting

    Floor Top Spindle Center: 44½”

    Front Bearing: TPI Taiwan 6307LLU

    Rear Bearing: TPI Taiwan 6205LLU

    Spindle Index #: 14/36/48 with Lock

    Headstock Through-Bore: ⅜”

    Tailstock Storage Of Centers

    Toolrest Post Size: 1″

    Spindle Size: 1¼” x 8 TPI RH

    Floor To Bed: 32½” with Pads

    Spring Loaded Spindle Lock

    Max Outboard Swing: 38″

    Swing Over Banjo: 19¾”

    Face Plate: 3″ Diameter

    Steel Bed: ASTM A36

    Headstock Spindle: MT2 Taper Hardened To 40° HRC

    Tailstock Quill: MT2 taper hardened to 40° HRC

    Swing Over Bed: 24″

    RPM High: 135-3500

    RPM Low: 50-1300

    Products specifications
    Engine Size 3HP
    RPM 1725
    Op Freq (Hz) 50
    Volts 220V
    Drive Belt Poly-Groove
    Distance Between Centers 36″
    Tool Rest 12"
    Helpful Info Recommended Breaker Size: 15 Amp
    Write your own review
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength.Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically.

     

    Features

    VFD: Delta S1 Variable Frequency Drive

    Remote Control Box With Speed Settings

    Two Ergonomic Control Panel Positions: High/Low

    Tailstock Quill: 4½”, Engraved, Self-Ejecting

    Floor Top Spindle Center: 44½”

    Front Bearing: TPI Taiwan 6307LLU

    Rear Bearing: TPI Taiwan 6205LLU

    Spindle Index #: 14/36/48 with Lock

    Headstock Through-Bore: ⅜”

    Tailstock Storage Of Centers

    Toolrest Post Size: 1″

    Spindle Size: 1¼” x 8 TPI RH

    Floor To Bed: 32½” with Pads

    Spring Loaded Spindle Lock

    Max Outboard Swing: 38″

    Swing Over Banjo: 19¾”

    Face Plate: 3″ Diameter

    Steel Bed: ASTM A36

    Headstock Spindle: MT2 Taper Hardened To 40° HRC

    Tailstock Quill: MT2 taper hardened to 40° HRC

    Swing Over Bed: 24″

    RPM High: 135-3500

    RPM Low: 50-1300

    Products specifications
    Engine Size 3HP
    RPM 1725
    Op Freq (Hz) 50
    Volts 220V
    Drive Belt Poly-Groove
    Distance Between Centers 36″
    Tool Rest 12"
    Helpful Info Recommended Breaker Size: 15 Amp
    Product tags
    Customers who bought this item also bought

    Nova Chuck Spur Centre 19mm

    WA-NCSC
    R318,00 incl VAT R530,00 incl VAT
    NOVA NCSC Chuck Spur Centre Accessory is an accessory for NOVA Chucks. Enables you to keep your NOVA Chuck on your lathe while you do spindle work. Designed for the bowl turner who does occasional spindle work, this accessory can be quick mounted into your NOVA Chuck and can carry out spur center functions. With solid 4 prongs to dig into wood.

    Nova Insert Chuck ILNS 1 1/4" 8 UNS RH DVR

    WA-ILNS
    Call for pricing
    Adapt your Insert Type NOVA chuck to a 1 1/4″ 8TPI UNS RH lathe. Allows you to keep the same chuck and accessories if you change your lathe. You only need to change the insert/adaptor. The internal thread is 1 1/4″ 8TPI UNS RH and the external thread matches the NOVA insert type chucks to simply and easily screw into the back of your NOVA Insert Type Chuck. Now your NOVA insert type chuck is ready to attach to your 1 1/4″ 8TPI UNS RH threaded lathe spindle.