JET JWL-1221VS WOOD LATHE

Massive cast iron frame with stand as an OPTIONAL EXTRA. An electronic speed control system, digital speed display, reversing switch and 3-speed belt drive. Tensioning and loosening of the drive belt with a ratchet lever Dividing device. Eccentric fixation of the headstock and tailstock. JWL-1221VS is the representative of a new generation of professional Jet lathes, combining state-of-the-art control electronics and an improved mechanical part. In comparison with the previous model (JWL-1220), the rigidity was significantly increased: the frame with a similar length became wider, and the total weight increased by 10 kg; more powerful spindle bearings are used. For the machine bed and stand, you can buy extensions, in this case the maximum center-to-center distance will increase to 1080 mm. Transmission of rotation from the engine to the spindle is performed by a 6-riveted poly-V-belt, three pairs of pulleys are provided to select the power transmission range. The belt is rearranged without the use of an auxiliary tool: the tension is controlled by a ratchet-operated lever. Eccentric fastening systems for the pod and the tailstock make their settings as simple and fast. The machine is equipped with a dividing device with a spring-loaded spindle locking pin, which also simplifies installation / dismantling on the faceplate spindle (this requires only one key). The speed can be adjusted with the built-in electronics, with the selected value displayed on the digital display. On the control panel there is also a reverse switch, which is indispensable for some types of work, for example, when grinding.