JET JWP15K HH 15’’(380mm) HELICAL THICKNESSER

Jet JPT-410 - combined machine for planing and thicknessing with a working width of 407 mm. This value is quite large by the standards of professional thicknessing machines, and by the standards of jointing - and is typical for equipment of a higher industrial class. This combination of characteristics makes this model attractive not only from the point of view of saving the working space, but also extending the scope of application. The design of the machine is one of the most successful on the market: the wide use of massive cast iron parts guarantees accurate work without vibration, with the topmounting the top module rises completely and does not interfere with work or chip removal, a powerful three-phase motor ensures high productivity and reliability. Special attention deserves a convenient eccentric mechanism for adjusting the position of the tables, both the supply and the receiving, which is necessary when installing the helical shaft (option). When choosing between two specialized or one combined machine, it should be taken into account that these models are almost as accurate, convenient and efficient as specialized ones, but will require somewhat more frequent servicing of the thicknesser part in case of intensive operation. In the basic version, the JPT-410 is equipped with a three-knife planing shaft, as an alternative, a helical shaft is provided, which is equipped with hard-alloy cutting inserts. It is more reliable and easier to operate (no adjustments are necessary), but due to the consecutive entry of the knives into the workpiece it works quietly and with less vibrations.

The Jet Tools JPT-310HH Combination Planer/Thicknesser Machine with Helical Cutterhead is optimally suited for use in woodworking workshops with limited space. The machine replaces the requirement of an individual Planer (Jointer) and a Thicknesser. This particular model is equally at home in both the demanding professional, as well as the amateur workshop, offering additional savings in your required workspace and is extremely cost efficient. To change from jointing (planing) operations to thicknessing mode, it is quick and easy to raise the upper module consisting of tables and frame, and to reset the Dust Extraction Hood and vica versa. This design also offer advantages both in operation and in servicing of the machine. The Helical Cutterhead, installed on the JPT-310HH, is usually only found on much more expensive machines. Helical Cutterheads have numerous advantages over standard three or four knife heads. These include much lower operating noise level, cleaner cutting of knots in the timber, much longer service life due to the multiple tetrahedral carbide knives, and very importantly, no need for complicated setup jigs and fiddling to get the cutters set at the right height. Features: Helical Cutterhead Folding Tables Depth Adjustment via an Eccentric Mechanism Height Adjustable Outfeed Table Adjustable Fence Stop Adjustable Cutterhead Guard Both Infeed & Outfeed Table are made from Solid Cast Iron

Combined Jet Jet JPT-310 is optimal for use in workshops with limited space as a replacement for individual thicknesser and jointer. This model is in demand both by lovers of woodworking and by professionals. In addition to significant work space savings, the JPT-310 also provides cost savings when purchasing. According to the main characteristics and convenience of work, this combined machine is not inferior to individual thicknesser and jointer. Long and massive cast-iron tables create a base sufficient for working with parts up to 2-3 meters long. Concerning the specialized machine, the fence stopper is slightly easier: it is not made of cast iron, but of an aluminum profile. On the other hand, these models have a rare advantage: a convenient eccentric height adjustment has not only a feeding but also a receiving table. This is necessary, first of all, when replacing the planer shaft with helical, the cutting inserts of which are not adjustable in height. To move from joining to thicknessing, it is sufficient to raise the upper module consisting of tables and frame and reset the chipper case, the previously made settings do not get knocked off. This design gives advantages both in operation and in servicing the machine. The shaft helical, available for Jet JPT-310 as an option, is widely in demand among professionals. Its main advantages are low noise level at work, clean cutting of knots, no wood breaks, long service life of carbide tetrahedral blades, no need for sharpening and adjustment. FEATURES: Possibility to install helical shaft Folding table Jointing Eccentric mechanism of depth adjustment Possibility to adjust the height of the receiving table Adjustable fence stop Adjustable blade guard Prefabricated tables of cast iron Planer stop from aluminum profile Thickening Disconnectable drive of feed shafts Adjusting the planing height of the rotating flywheel

Combined Jet Jet JPT-310 is optimal for use in workshops with limited space as a replacement for individual thicknesser and jointer. This model is in demand both by lovers of woodworking and by professionals. In addition to significant work space savings, the JPT-310 also provides cost savings when purchasing. According to the main characteristics and convenience of work, this combined machine is not inferior to individual thicknesser and jointer. Long and massive cast-iron tables create a base sufficient for working with parts up to 2-3 meters long. Concerning the specialized machine, the fence stopper is slightly easier: it is not made of cast iron but of an aluminium profile. On the other hand, these models have a rare advantage: a convenient eccentric height adjustment has not only a feeding but also a receiving table. This is necessary, first of all, when replacing the planer shaft with helical, the cutting inserts of which are not adjustable in height. To move from joining to thicknessing, it is sufficient to raise the upper module consisting of tables and frame and reset the chipper case, the previously made settings do not get knocked off. This design gives advantages both in operation and in servicing the machine. The shaft helical, available for Jet JPT-310 as an option, is widely in demand among professionals. Its main advantages are low noise level at work, clean cutting of knots, no wood breaks, long service life of carbide tetrahedral blades, no need for sharpening and adjustment.

The JPT-410HH Jet is a helical head combination machine for surfacing and thicknessing with a 407 mm working width. This value is quite large by the standards of professional jointing machines, and by the standards of jointing - and is entirely characteristic of equipment of a higher industrial class. This combination of characteristics makes the model attractive not only in terms of saving working space, but also expanding the scope. The machine design is one of the most successful on the market: the extensive use of massive cast-iron parts ensures accurate work without vibrations; when jointing, the upper module rises completely and does not interfere with work or stripping, a powerful three-phase motor ensures high performance and reliability. Special attention is given to a convenient eccentric mechanism for adjusting the position of the tables, both the feed and the receiver, which is necessary when installing the helical shaft (optional). The helical shaft included in the basic equipment is equipped with carbide cutting inserts. It is safer and easier to operate (no adjustments are needed), and due to the sequential entry of knives into the work piece, it works quieter and with less vibrations.

Designed especially for the hobby woodworker, the JWP-12 is compact and very capable. Its powerful 1,800W motor quickly removes material up to 2.5mm thick with each pass. The block is fitted with two resharpenable HSS blades and gives 18,000 cuts/min, this coupled with the feed speed of 7m/min ensures an excellent ripple-free finish.