Jet JSS-16 Bench Top Variable Speed Scroll Saw

Jet JSS-16 Bench Top Variable Speed Scroll Saw

Call for pricing
The JET Electric Scroll Saw comes equipped with a powerful commutator DC motor with a variable regulation of speed (550-1600 / min). That is why it can handle a wide range of materials up to 50 mm thick. The dust extraction outlet is 35 mm. The generously large table (410 x 254 mm) has a maximum width of cut 510 mm and may be tilted to up to 45°. The saw comes equipped with a pin clamping of saws. The release control wheel allows for a quick and simple swap. The ventilator keeps your workspace clean and well visible. The heavy cast-iron base offers stability and minimizes vibration.
- +
Manufacturer: JET TOOLS
Availability: Out of stock
Manufacturer part number: 10000808M

Key Features:

• 410 x 254mm table tilts to 45° for bevel cutting
• Table blow out for an easier and more accurate cut.
• Powerful induction motor
• A cast-iron base for improved stability and low vibrations.
• Variable speed 400-1,600/min for cutting various materials up to 50mm deep
• 406mm (16") throat
• 35mm dust port allows connection to vacuum cleaner
• 410 x 254mm table tilts to 45° for bevel cutting


• Type: JSS-16
• Rating: Hobby
• Power Input (230 V): 90 W
• Vibration speed: 550 - 1600 / min
• Saw blade length: 127 mm
• Saw blade travel: 15 mm
• Saw blade width: min. / max. 0,5 mm / 2,8 mm
• Maximum width of cut: 510 mm
• Max height of cut at 90°: 50 mm
• Table size: 410 x 253 mm
• Table tilt: 0° to 45°
• Dust extraction: 35 mm
• Length x width x height: 620 x 285 x 325 mm
• Weight: 11,5 kg

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
  • Bad
  • Excellent
Customers who bought this item also bought
Robert Sorby Hollowing Tool South Africa


End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber. Where space permits the larger tool (851H) provides a heavier section and has the benefit of a replaceable swivel cutting tip. This can be used in conjunction with the wall thickness gauge (854) to create consistent side wall thickness.
R1 130,00 incl VAT
Robert Sorby Cutter for Hollowing Tool South Africa


The Robert Sorby General Purpose Cutter is a small cutter designed for the removal of waste material when using the smaller Swan Neck and Swivel Tip probe tools. Ideal for end grain use on shallower depth projects. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Related Products: This cutter is designed for use with the following tools: Swan Neck Hollowing Tools (851H, 855H) Swivel Tip Probe (8801H
R234,36 incl VAT
Robert Sorby Full Round Nose Scraper 1 1/2" (38mm) South Africa


Designed for finishing when working in the outboard mode of the lathe.
R1 890,00 incl VAT
Robert Sorby Scraper Bowl Finishing Inboard South Africa


Designed for finishing large bowls when working inboard (curve on left)
R2 885,00 incl VAT
Robert Sorby Spiralling System South Africa


Creating barley twists, spirals and flutes has always represented a problem for the woodturner. The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner’s imagination to run wild as he enters a new field of decoration. Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice - but still comes with instructions and ideas on further use. The built-in rest allows the work to be approached at a variety of angles - graduations on the rest ensure repeatability. The degree of off-set determines the pitch of the spiral. Another variation is introduced with the addition of three different cutters which can also be used for texturing. From these the turner can either produce amongst other works fine spirals on the stem of a delicate goblet, chequered designs, rope effect twists, heavy patterns on boxes, spindles or candlesticks as well as around the base. The 330H and 330S come with four cutters whilst the 320H and 320S are the same tool but with a single cutter (see table). It is also possible to up-grade a texturing tool to create spirals by the purchase of the tool rest (360) and an appropriate cutter. The Spiralling and Texturing tools are shown to full effect in the Robert Sorby Focus on Decorative Techniques DVD (RSDVDDT). If your requirement is for finer spirals we also have a micro spiralling tool (ref 370A). Also available unhandled for the Sovereign System.
R5 160,00 incl VAT
Robert Sorby Toolrest Crossbar 4" South Africa


This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available in ½", ⅝", ¾", ⅞", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes. The same stems are compatible with the Precision Boring System.
R618,51 incl VAT