You have no items in your shopping toolbox.
Close
Search
Filters

JET 1443 WOODWORKING LATHE

The JWL-1443 wood lathe features simple and convenient controls in combination with a large processing area and the possibility of turning the front headstock. Due to these qualities JWL-1443 is ideal for an amateur workshop, where you have to solve a variety of tasks. The design is more professional than an amateur class. The important part - the frame - is made of cast iron, its upper side is polished and is an ideally flat plane, which ensures the convenience and accuracy of work. Under the bed is a sturdy pallet made of 2 mm steel with six tool storage holes. Dimensions between the centers and above the bed are large enough to handle large billets. Such tasks correspond to a powerful asynchronous 750-watt motor, which has cooling ribs and is designed for continuous operation. To transfer the rotation, a V-belt is used, having 10 fixed speeds for easy switching. Change them without turning off the motor. A useful feature of the machine is the possibility of turning the front headstock around the vertical axis. Due to this, it is possible to fix on the faceplate (included in the kit) and grind the blanks with a diameter larger than the size above the bed. In this case, the key importance is the construction of the pod. It has three degrees of freedom and is assembled from massive cast parts; all this allows you to use the support when turning the side of the frame. In some cases, it is also useful to move the front headstock along the bed.
Manufacturer: JET
Availability: Out of stock
SKU: WM-1443
Manufacturer part number: JWL-1443
Call for pricing
- +

Model JWL-1443
Article (230 V) 10000501M
Power Consumption 0.75 kW
Spindle speed at idle speed 500 - 2200 rpm
Diameter of rotation above the bed 370 mm
Diameter of rotation above the support 280 mm
Distance between centers 1100 mm
Head angle of front headstock 0 - 360 °
Cone of spindle MK-2
Spindle thread M33 x 3,5
Cone of tailstock MK-2
Backing of the rear tank 108 mm
Overall dimensions (LxWxH) 1750 x 480 x 1165 mm
The weight 103 kg

Model JWL-1443
Article (230 V) 10000501M
Power Consumption 0.75 kW
Spindle speed at idle speed 500 - 2200 rpm
Diameter of rotation above the bed 370 mm
Diameter of rotation above the support 280 mm
Distance between centers 1100 mm
Head angle of front headstock 0 - 360 °
Cone of spindle MK-2
Spindle thread M33 x 3,5
Cone of tailstock MK-2
Backing of the rear tank 108 mm
Overall dimensions (LxWxH) 1750 x 480 x 1165 mm
The weight 103 kg

Write your own review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Product tags
Customers who bought this item also bought
Picture of SORBY TOOLREST

SORBY TOOLREST

TA-B360
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available in ½", ⅝", ¾", ⅞", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes. The same stems are compatible with the Precision Boring System.
R 618,51 incl tax
Picture of SORBY SPIRALLING SYSTEM

SORBY SPIRALLING SYSTEM

TA-B330
Creating barley twists, spirals and flutes has always represented a problem for the woodturner. The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner’s imagination to run wild as he enters a new field of decoration. Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice - but still comes with instructions and ideas on further use. The built-in rest allows the work to be approached at a variety of angles - graduations on the rest ensure repeatability. The degree of off-set determines the pitch of the spiral. Another variation is introduced with the addition of three different cutters which can also be used for texturing. From these the turner can either produce amongst other works fine spirals on the stem of a delicate goblet, chequered designs, rope effect twists, heavy patterns on boxes, spindles or candlesticks as well as around the base. The 330H and 330S come with four cutters whilst the 320H and 320S are the same tool but with a single cutter (see table). It is also possible to up-grade a texturing tool to create spirals by the purchase of the tool rest (360) and an appropriate cutter. The Spiralling and Texturing tools are shown to full effect in the Robert Sorby Focus on Decorative Techniques DVD (RSDVDDT). If your requirement is for finer spirals we also have a micro spiralling tool (ref 370A). Also available unhandled for the Sovereign System.
R 3 430,00 incl tax
Picture of SORBY 67HS BEGINNERS SET OF TURNING TOOLS

SORBY 67HS BEGINNERS SET OF TURNING TOOLS

TA-67HS
Set of 6 standard sized tools for beginners. Suitable for both bowl and spindle turning. All 350 mm long.
R 5 382,47 incl tax
Picture of SORBY SCRAPERS - HEAVY DUTY- BOWL FINISHING INBOARD

SORBY SCRAPERS - HEAVY DUTY- BOWL FINISHING INBOARD

TA-8008
Designed for finishing large bowls when working inboard (curve on left)
Call for pricing
Picture of SORBY SCRAPERS -  HEAVY DUTY - 38MM FULL ROUND

SORBY SCRAPERS - HEAVY DUTY - 38MM FULL ROUND

TA8004L
Designed for finishing when working in the outboard mode of the lathe.
R 1 890,00 incl tax
Picture of SORBY CUTTER FOR HOLLOWING TOOL

SORBY CUTTER FOR HOLLOWING TOOL

TA-851C
The Robert Sorby General Purpose Cutter is a small cutter designed for the removal of waste material when using the smaller Swan Neck and Swivel Tip probe tools. Ideal for end grain use on shallower depth projects. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Related Products: This cutter is designed for use with the following tools: Swan Neck Hollowing Tools (851H, 855H) Swivel Tip Probe (8801H
R 234,36 incl tax
Picture of SORBY 20" WALL THICKNESS GAUGE

SORBY 20" WALL THICKNESS GAUGE

TA-B857
Use this unique wall thickness gauge for consistent results every time.
Call for pricing
Picture of SORBY 14" MEDIUM HOLLOWING

SORBY 14" MEDIUM HOLLOWING

TA-B851
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber. Where space permits the larger tool (851H) provides a heavier section and has the benefit of a replaceable swivel cutting tip. This can be used in conjunction with the wall thickness gauge (854) to create consistent side wall thickness.
R 772,16 incl tax