Liberon Wax and Polish Remover removes old wax, dirt, smoke and everyday grime from antique and modern wood furniture and interior wood work including doors, beams, dado rails, and banisters without harming the original finish and patina. This unique formula should not lift veneers or raise the grain, making it suitable for even the most delicate surfaces. Use to remove built-up layers or wax which may be causing a haze or bloom on the surface.
Chestnut Products’ Microcrystalline Wax is a blend of high quality waxes rich in microcrystalline wax – a wax derived from the petroleum refining process and known for the fineness of its crystals. This is mixed with a special solvent to create a firm wax which, when dry, knits down to form a very dense coating making it very water resistant, meaning that it is ideal for any items that are likely to come into contact with water for short periods of time. Microcrystalline waxes also have a higher melting point than other waxes traditionally used to make polishing waxes, the benefit of which is that repeated handling of items finished in Microcrystalline Wax won’t finger mark in the same way, as the melting point is higher than normal body temperature. Microcrystalline Wax should be used over one of the Chestnut Products’ sanding sealers and allowed to dry (about 20 minutes) before buffing to a shine. For best results apply a very thin coat, spreading the wax evenly over the entire surface. Microcrystalline Wax can also be used on the Buffing Wheel System. In this situation use the A and B Wheel as normal, then apply the Microcrystalline Wax to the item you are polishing. Allow 20 minutes for the wax to dry then buff and normal using the C Wheel. You can use the same C Wheel for both Microcrystalline Wax and the Carnuaba Wax Stick. Microcrystalline Wax has been tested to the EN71 Part 3 regulations regarding coatings used on toys, you can download a copy of the certificate here if you need it.
The kit includes a polishing buff and 5 solid polishing compounds. The compounds are used with various metals. It can be used to remove stretcher strains, orange peel, polishing wheel grit lines and light die marks, etc.
The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is the same as the backing pad's diameter.
Howard products prevent drying and deterioration of all wood finishes. Polish all wood surfaces to a soft lustre and protect with a coating of natural waxes.
Pure Tung Oil is a premium, pure and natural oil for woodcare. Suitable for interior and exterior use, it is highly resistant to water, alcohol and food acids. Providing a hard wearing finish, it is ideal for surfaces such as kitchen worktops, tables and all high quality interior wood. Recommended for use on external oak, it contains no added dryers, and is safe to use on toys. It provides a long-lasting, matt finish.
For filling and masking superficial scratches. Retouch Crayons can be used to fill and mask superficial scratches on finished wooden surfaces and furniture, such as nail holes and worm holes. Applied with an easy rub on and buff off application, they expand and contract with the wood, do not shrink or drop out, and are available in a wide range of colours.