HAND TOOLS AND MEASURING

The digital depth gauge is an instrument used to measure the depth, width, and height of tooling in stationary machines. The depth gauge can be used to setup: •The height adjustment of a circular saw blade above the table for grooving. •The height and depth adjustment on a router table for molding/counter-profiling. •The width adjustment on the rip fence of a bandsaw.

The Vernier caliper is used to give a direct reading of the distance measured with high accuracy and precision.

Measuring Tape with multi-lock

The retractable measuring tape is an extremely useful tool to be used in all measuring applications.

Measure tape is used for measuring

The retractable measuring tape is an extremely useful tool to be used in all measuring applications.

The retractable measuring tape is an extremely useful tool to be used in all measuring applications.

MEASURING TAPE STEEL BLADE USED FOR MEASURING LENGTHS.

Holds door on its edge while routing hinge recess & mortise for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 mm to 55 mm thick. Allows door to be tilted back to assist fitting into frame. Maximum door weight 58 kg.

The vernier caliper is used to give a direct reading of the distance measured with high accuracy and precision. There are two different vernier calipers available in the Tork Craft range: Analog vernier calipers. Digital vernier calipers.

The Kreg Rip-Cut Circular Saw Guide connects to most circular saws-right or left blade. Reversible guide arm for right or left-hand use.

This tool is to fit door handles with precision

Hard-wearing carry case for the DAR/200 digital angle rule. Belt loop, hanging loop/carry strap with quick-release buckle. Spare battery pocket. Pen/pencil elasticated loops. Contents not included.

Straight, accurate, splinter-free cuts made easy. Mount almost any circular saw to the universal sled. Universal Sled compatible with Kreg Rip-Cut.

Cutting a smooth radius to soften a 90° corner is fast and flawless with our Corner Radius Routing Templates. The templates can be used alone to draft a simple pencil line, or, better yet, you can click them onto the included handle and rout the radius on your router table with no need for pencil lines at all. The bottom of each template has grippy rubber strips, which, combined with the handle, provide a solid grip that firmly straddles the corner of your workpiece. You get a wide range of a dozen total radiuses: 1/8'' through 1'' radiuses, in 1/8'' increments, and 1-1/4'' through 2'' radiuses, in 1/4'' increments. They're the perfect solution for any project with quarter-round corners, such as the armrests on Adirondack chairs, bookcase end panels, tabletops, wall-mounted shelves and more.

Stanley Tools - 30 ft FATMAX AutoLock Tape Measure - FMHT33348 Hover to zoom Learn More Support Search FAQs 30 ft. FATMAX® Auto-Lock Tape Measure FMHT33348 Where To Buy STANLEY FATMAX® Auto-Lock tapes make quick work of any layout tasks. The auto-locking mechanism provides control and precision during tape blade extension, measurement, and retraction. Protective full tape blade coating and added BladeArmor® at the hook extends tape life against abrasion and heavy use. Large, easy to read numbers and standard stud markers assure accuracy with the STANLEY FATMAX Auto-Lock tape measure. Features & Benefits Auto-Lock mechanism automatically holds the blade in place when extended Durable high impact case with non-slip rubber stands up to job site demands Stands up to abrasion and repeated use with durable full tape blade coating Added BladeArmor® coating maximizes durability of the tape at the hook and extends tape life** Easy to read measurements with large font numbers

FEATURES A high-impact case for durability Reinforced fibreglass blade for accurate measurements Measurements on both sides of the blade High visibility case makes it easy to detect on the job site

This Stanley Chalk Line Reel allows you to apply a uniform chalk line up to 100 feet using a long-wearing felt gasket that hugs the line and distributes the chalk coating evenly. Made of a durable, heavy-duty die-cast aluminum body for extra long life in a blue-gray color, this reel is designed with a plastic and metal universal hook built to endure the rigors of everyday use. This tool can also be used as a plumb bob.

perfect for quick and accurate interior measurements up to 20m. Its small and light and fits easily into your pocket, simple one-button operation.

Compact and portable meter for quickly and accurately reading the moisture content level of different materials. Digital LCD display shows the moisture content percentage with either prongs or built-in sensors. Hold function and ambient temperature measurements. Ideal for use on wood, plaster, concrete, mortar, and other building materials.

Struggling to hold cabinet parts in alignment while driving fasteners can be an exercise in frustration, and if you're using a nail gun, downright dangerous. The Rockler Clamp-It® Corner Clamping Jig eliminates that frustration by providing another set of ''hands'' to hold your parts together. It's used with the enormously popular Clamp-It® (#29190, sold separately) to hold panels at a precise right angle for fastening. Used in sets of four, the jigs are supportive enough to hold an entire case assembly as it is being assembled. The clamps have soft pads to prevent workpiece marring. Mounting holes in the jig allow for attachment to your work surface. Includes: 1 x Rockler Clamp-It® Corner Clamping Jig 2 x 1'' Screws for Attaching Clamp-It (#29190 not included)

This tile cutter is for ceramic tiles only.

Tough, Reliable Tool. Used for plastering wall to make a smooth finish.

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Mild steel blades with wooden handle, used for finishing cement and plaster neatly in between bricks

Designed To Imprint Grooves Into Recently Filled Mortar Joints At The Stage When They Are Starting To Set. Used To Form Perfect Groove Finishes In Flooring And Steps, To Give It A Non-Slip Surface.

Intuitive radar scanner for almost all materials Spot measurement provides accurate detection on narrow surfaces Centre finder offers visual guidance, to clearly identify the precise location of the object's centre Dual Power Source allows for use with a 12 V Li-ion battery or with standard alkaline batteries The detector D-tect 120 Professional is an intuitive radar scanner developed for almost all materials. Spot measurement provides accurate detection on narrow surfaces, while the centre finder shows the precise location of an object's centre. Additionally, Dual Power Source technology allows for use with both a 12 V Li-ion battery or standard alkaline batteries. It is suitable for a range of craftsmanship disciplines to locate pipes filled with water and cables as well as to avoid drilling mishaps when performing carpentry, plumbing, electrical, and HVAC applications. The D-tect 120 Professional offers a simple user interface with three self-explanatory selection buttons for adjusting to various applications and it is able to detect objects at depths of up to 12 cm. Audio and visual signals notify the user when objects are detected in the wall.

Halves the angle for mitre joints. Used for mitre cutting of frames, skirting, architrave and beading as well as basic marking out. Halves angle to achieve the correct cutting angle before cutting mitres. Use for mitre cutting of frame, skirting (not tall skirting), architraves and beading as well as basic marking out. Sets internal and external angles. Can be used with hand mitre and snip-off saws. Patent No. PCT WO 00/67969.