Close
Filters

FESTOOL FS-SP 5000/T SPLINTER GUARD

FESTOOL FS-SP 5000/T SPLINTER GUARD

Temp out of stock : R735,00 incl VAT
Manufacturer: Festool
Availability: Out of stock
SKU: TAFSGR8
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
CHESTNUT 500ML SPIRIT THINNERS SOUTH AFRICA

Chestnut 500ml Spirit Thinners

PACNST5
This clear, slower drying solvent is primarily for thinning our Spirit Stain to give delicate wash effects without affecting the colour (as methylated spirit would). It can also be used to dilute Friction Polish or French Polish if needed (usually only when the cap has been left off and the product has thickened up). It’s also suitable for use in making french polish if you want to dissolve shellac flakes in it.
R395,00 incl VAT
CHESTNUT SPRAY DIFFUSER (PACK OF 2) SOUTH AFRICA

Chestnut 2 Pack Spray Diffuser

PACNSD2
This neat little gadget is a Spray Diffuser or sometimes known as a blowpipe. Used to apply Spirit Stains, these are simple to use 'lung powered' atomisers for spraying stains and also thin paints. The diffuser is opened to 90 degrees and the long end goes into the stain. The mouthpiece is blown by drawing up the stain and spraying it onto the desired item. It's the product that everyone says 'I've been looking for them for ages. Comes supplied in a pack of 2.
R115,00 incl VAT
Picture of JET OUTER FILTER FOR AIR FILTRATION SYSTEMS

JET OUTER FILTER FOR AIR FILTRATION SYSTEMS

TAOF510
Spare electrostatic outer filter. Ideal for normal dust filtration.
R295,00 incl VAT
JET INNER FILTER FOR AIR FILTRATION SYSTEM AFS1000 SOUTH AFRICA

JET INNER FILTER FOR AIR FILTRATION SYSTEM AFS1000

TAIF100
Spare inner cartridge filter (Washable)
R950,00 incl VAT
TORK CRAFT BLADE DIAMOND CONTINUOUS RIM 25.4 X 180MM SOUTH AFRICA

TORK CRAFT BLADE DIAMOND CONTINUOS RIM 25.4 X 180MM

TA10180
Continuous cutting used for cutting tiles and concrete
R195,00 incl VAT
CHESTNUT 500ML HARD WAX OIL SOUTH AFRICA

Chestnut 500ml Hard Wax Oil

PACNHWO
If you’re looking for a clear finish that is tough, hardwearing and gives a bright gloss yet is still very easy to apply, even on larger areas, you’re in the right place. Hard Wax Oil is a particular blend of tough oils combined with special waxes which dries to an exceptionally resilient finish. Ideal for anything that is going to be subjected to water splashes or a lot of handling this oil may not be indestructible but it will stand up to a lot of abuse. It retains the ease of application typical of an oil and it stays wet long enough to get a smooth, even finish – even on large areas – but is touch dry and tack-free in about 20 minutes, and better yet is ready for a second coat after about four hours (in normal conditions). Hard Wax Oil will build to a bright gloss finish after 2-3 coats. Rub down lightly between coats with a fine abrasive. Once hard dry (allow at least 24 hours) it can be brought to an even brighter shine using either the Buffing Wheel System or Burnishing Cream. For a not-quite-so-bright finish use a mild abrasive to reduce the gloss. For best results lubricate the abrasive with Microcrystalline Wax to retain the toughness of the oil.
R820,00 incl VAT