Close
Filters

Chestnut 500ml Hard Wax Oil

Chestnut 500ml Hard Wax Oil

Sorry - this product is no longer available

Temp out of stock : R820,00 incl VAT
If you’re looking for a clear finish that is tough, hardwearing and gives a bright gloss yet is still very easy to apply, even on larger areas, you’re in the right place. Hard Wax Oil is a particular blend of tough oils combined with special waxes which dries to an exceptionally resilient finish. Ideal for anything that is going to be subjected to water splashes or a lot of handling this oil may not be indestructible but it will stand up to a lot of abuse. It retains the ease of application typical of an oil and it stays wet long enough to get a smooth, even finish – even on large areas – but is touch dry and tack-free in about 20 minutes, and better yet is ready for a second coat after about four hours (in normal conditions). Hard Wax Oil will build to a bright gloss finish after 2-3 coats. Rub down lightly between coats with a fine abrasive. Once hard dry (allow at least 24 hours) it can be brought to an even brighter shine using either the Buffing Wheel System or Burnishing Cream. For a not-quite-so-bright finish use a mild abrasive to reduce the gloss. For best results lubricate the abrasive with Microcrystalline Wax to retain the toughness of the oil.
Manufacturer: Chestnut
Availability: Out of stock
SKU: PACNHWO
Manufacturer part number: 0

Specifications:

Typical Usage

  • Use on exterior furniture, ornaments and fittings. Also suitable for worktops and tabletops

Method Of Application

  • Brush or Cloth.

Drying Time

  • Overnight

Coverage

  • Approx 6 – 8m² per Litre.

Compatibility

  • Sealers should not be used with this product. WoodWax 22 or Paste Wax may be used on top of this product.

Tips:

  • After applying, wipe off any surplus after about 20 minutes and allow to dry

Thinners

  • This product should not require thinning, however, it may thicken with age, in which case use White Spirit.

Safety Considerations

  • As with Danish Oils & Linseed Oils, cloths used for application must be laid flat to dry before disposal or kept in a screw-capped glass jar. 
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Chestnut Woodturners Stick Wax South Africa

Chestnut Woodturners Stick Wax

PACNWSW
Designed for Woodturners, this stick wax is specially shaped to allow it to be applied to pretty much any shape of the item! A mixture of beeswax and carnauba wax is slightly softer than the Carnauba Wax Stick and therefore slightly easier to apply and there are no concerns about it marking softer woods. Applied over a sanding sealer, simply hold the stick against the revolving work and allow the heat generated to melt the wax onto the wood. Buff up straight away using Safety Cloth, using the cloth to ensure an even coating.
R74,00 incl VAT
Picture of TOOLMATE RESIN PIGMENT PEARLESCENT  RUFOUS

TOOLMATE RESIN PIGMENT PEARLESCENT RUFOUS

PARPP-R
R70,00 incl VAT
Picture of TOOLMATE RESIN PIGMENT PEARLESCENT MALACHITE TEAL

TOOLMATE RESIN PIGMENT PEARLESCENT MALACHITE TEAL

PARPP-M
R35,00 incl VAT
Picture of TOOLMATE RESIN PIGMENT PEARLESCENT SAPPHIRE BLUE

TOOLMATE RESIN PIGMENT PEARLESCENT SAPPHIRE BLUE

PARPPSA
R100,00 incl VAT
Picture of TOOLMATE RESIN PIGMENT PEARLESCENT BLACK

TOOLMATE RESIN PIGMENT PEARLESCENT BLACK

PARPPBL
R35,00 incl VAT
CHESTNUT 500ML MELAMINE LACQUER SOUTH AFRICA

Chestnut 500ml Melamine Lacquer

PAMELAM
When you’re looking for a hard-wearing, heat and water-resistant, quick-drying gloss lacquer you need to look no further than Melamine Lacquer. Based on cellulose technology, Melamine Lacquer has a catalyst suspended within it; when the lacquer is in the can it is inert but once applied and exposed to the air, the lacquer dries within five minutes like cellulose and then the catalyst kicks in and the lacquer go on to chemically cure to give a more durable coating. 90% of the curing process happens in the first seven days after application, making the lacquer very hard-wearing, the remaining 10% of the process can take up to two weeks more to give maximum toughness, something you only need to consider if the lacquer is going to be subjected to extremely hard use. Melamine Lacquer is designed to give a full gloss finish which will be achieved with a very careful application. It can be applied by brush (foam or bristle), cloth or by spraying. Where necessary, use Cellulose Thinners to dilute the product – especially helpful if working on a large area. The gloss level of Melamine Lacquer can be increased by using Burnishing Cream once it has dried, and it can also be overcoated with Friction Polish (to increase the depth of the shine) or WoodWax 22 or Microcrystalline Wax (for a more natural feel).
R620,00 incl VAT R451,00 incl VAT