Close
All Categories
    Filters
    Preferences
    Search

    Sorry - this product is no longer available

    Manufacturer: Chestnut

    Chestnut 1ltr End Seal

    Call for pricing
    End Seal is an emulsified paraffin wax used the seal the ends of freshly cut timber to slow down the drying process and reduce the risk of timber splitting. It can also be used on work-in-progress that is being left unfinished where there is a risk of the timber splitting. Apply it liberally, normally by brush but it can be sprayed if needed, usually to the smallest surface of the timber which will normally be the end grain where moisture is most likely to escape from. Sealing the surface will encourage the moisture to escape via the larger areas which will result in a slower exit.
    SKU: PACNES1
    Manufacturer part number: 0
    GTIN: 5060095030219
    Availability: Out of stock
    Manufacturer: Chestnut
    Availability: Out of stock
    SKU: PACNES1
    Manufacturer part number: 0
    GTIN: 5060095030219

    Specifications:

    Typical uses

    • To seal wet wood to prevent splitting

    Method of application

    • Brush or dip

    Drying time

    • Up to one hour depending on the thickness of the coating

    Coverage

    • 4-6 sq m per litre

    Tips

    • Apply liberally

    Thinners

    • Water
    Write your own review
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    Specifications:

    Typical uses

    • To seal wet wood to prevent splitting

    Method of application

    • Brush or dip

    Drying time

    • Up to one hour depending on the thickness of the coating

    Coverage

    • 4-6 sq m per litre

    Tips

    • Apply liberally

    Thinners

    • Water
    Customers who bought this item also bought

    Chestnut Woodturners Stick Wax

    PACNWSW
    Call for pricing
    Designed for Woodturners, this stick wax is specially shaped to allow it to be applied to pretty much any shape of the item! A mixture of beeswax and carnauba wax is slightly softer than the Carnauba Wax Stick and therefore slightly easier to apply and there are no concerns about it marking softer woods. Applied over a sanding sealer, simply hold the stick against the revolving work and allow the heat generated to melt the wax onto the wood. Buff up straight away using Safety Cloth, using the cloth to ensure an even coating.

    Toolmate 5L Clear Slow Cast Epoxy Resin

    PAES523
    R2 445,00 incl VAT
    The Toolmate Slow casting resin is UV Resistant and gives you a great super clear cast. Ideal for the casting of river tables and much more. The product does not need to be poured in layers to get to your desired thickness.

    Epoxy Pigment Royal Blue

    PAEP016
    R32,00 incl VAT
    Epoxy Pigment Royal Blue

    Robert Sorby Side & Face End Cutter

    TA04C07
    R205,00 incl VAT
    The Robert Sorby Side and Face End Cutter is an ideal tool for cleaning up the face of a rim or inside a box. Its unusual dog leg shape provides easy access for those awkward internal finishing cuts. This cutter is one of 14 specialised tips that support a range of tools and offer incredible flexibility to the turner. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Sharpening can be achieved with the cutter mounted on the tool.

    Robert Sorby Side/End Box Cutter

    TA04C08
    R205,00 incl VAT
    Designed to create parallel sides on boxes and vases the Robert Sorby Box Cutter is equally adept at creating flat bottomed surfaces and delivering those perfectly crisp corners on small projects. The Box Cutter is one of 14 specialised tips that support a range of tools and offer incredible flexibility to the turner. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Sharpening can be achieved with the cutter mounted on the tool.

    Jorgensen Bar Clamp Medium Duty Steel 12"

    HTC3712
    R334,00 incl VAT
    The 12" Medium-Duty Steel Bar Clamp from Jorgensen is designed with home crafters, woodworkers, cabinet-makers, and metalworkers in mind. The Steel Bar Clamp features a 2.5" reach and has a threaded sliding-head design to accommodate the screw and allow for easy opening and closing. The steel bars are plated, round-edged, and rust-resistant.