Close
Filters

Chestnut 500ml Burnishing Cream

Chestnut 500ml Burnishing Cream

R398,76 incl VAT
This creamy liquid has a very mild abrasive within it which acts like ‘liquid sandpaper’ on finished surfaces, cutting back and cleaning the finish and elevating it to a glossier, brighter finish. It can be used to smooth Cellulose Sanding Sealer prior to applying wax or Friction Polish, or, after allowing a suitable time to dry, on any of the lacquers, Friction Polish, Finishing Oil or Hard Wax Oil. A deep finish can be achieved using Burnishing Cream on a coat of Melamine Lacquer, then a coat of Friction Polish and finally the Burnishing Cream again. Use it sparingly so as not to over lubricate the surface and be sure to shake the bottle before use. It is not advisable to use a lacquer on top of a surface that has had Burnishing Cream used on it.
- +
Manufacturer: Chestnut
Availability: In stock
SKU: PACNBC5
Manufacturer part number: 0

Specifications:

Typical uses

  • To improve the gloss of most of the products in the range or as a ‘liquid sander’ on Cellulose Sanding Sealer before using WoodWax 22, Microcrystalline Wax or Friction Polish.

Method of application

  • Cloth.

Drying time

  • Not applicable.

Coverage

  • Not applicable.

Compatibility

  • Use on Cellulose Sanding Sealer (see above), all of the lacquers in the range, Finishing Oil or Hard Wax Oil (once hard dry), Friction Polish.

Tips

  • Use sparingly. Gives a great finish when used on Friction Polish applied over burnished Melamine Lacquer.

Thinners

  • Not applicable.

Safety Considerations

  • Flammable.
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
Picture of TOOLMATE 600MM ALUMINIUM T-TRACK

TOOLMATE 600MM ALUMINIUM T-TRACK

TACK600#
Specifications: Width: 18.97mm Height: 12.70mm Throat Width: 8.97mm Internal Slot Height: 6.70mm Internal Slot Width: 12.97mm Length: 600mm
Call for pricing
CHESTNUT 225ML MICROCRYSTALLINE WAX SOUTH AFRICA

Chestnut 225ml Microcrystalline Wax

PACNMW2
Chestnut Products’ Microcrystalline Wax is a blend of high quality waxes rich in microcrystalline wax – a wax derived from the petroleum refining process and known for the fineness of its crystals. This is mixed with a special solvent to create a firm wax which, when dry, knits down to form a very dense coating making it very water-resistant, meaning that it is ideal for any items that are likely to come into contact with water for short periods of time. Microcrystalline waxes also have a higher melting point than other waxes traditionally used to make polishing waxes, the benefit of which is that repeated handling of items finished in Microcrystalline Wax won’t fingermark in the same way, as the melting point is higher than normal body temperature. Microcrystalline Wax should be used over one of the Chestnut Products’ sanding sealers and allowed to dry (about 20 minutes) before buffing to a shine. For best results apply a very thin coat, spreading the wax evenly over the entire surface. Microcrystalline Wax can also be used on the Buffing Wheel System. In this situation use the A and B Wheel as normal, then apply the Microcrystalline Wax to the item you are polishing. Allow 20 minutes for the wax to dry then buff and normal using the C Wheel. You can use the same C Wheel for both Microcrystalline Wax and the Carnauba Wax Stick. Microcrystalline Wax has been tested to the EN71 Part 3 regulations regarding coatings used on toys, you can download a copy of the certificate here if you need it.
Call for pricing
CHESTNUT 500ML FRICTION POLISH SOUTH AFRICA

Chestnut 500ml Friction Polish

PACNFP5
Friction Polish is a shellac-based polish ideal for creating a high gloss finish on or off the lathe. It’s a great decorative finish and is ideal for small items but can be difficult to apply to larger items on the lathe (over about 8-inch diameter). The high amount of shellac in Friction Polish does two main things. Firstly it helps seal bare wood and give it a great shine, which is good. Sadly the price of this commodity shot up a few years ago when the shellac crop failed and it never went back down, meaning that the cost of the polish has also risen sharply. Nevertheless, Friction Polish remains one of the most popular finishes for turners. It can be applied to bare wood but is normally used over a sealer and any of the sealers in the Chestnut Products range are suitable for this. Applied with the lathe running it dries almost instantly and builds to a deep, rich shine very quickly. Avoid using too much as this can cause ‘rings’ to appear on the surface. Friction Polish can be applied off the lathe with great success, using it like a French-Polish and rubbing it into the surface. This does require a large amount of elbow grease (sadly not something we supply) but the end result is well worth the effort!
R575,00 incl VAT
TREND AIR STEALTH P3 NUISANCE FILTER - SOUTH AFRICA

TREND AIR STEALTH P3 NUISANCE FILTER

TASTTH3
Pair of P3(R) nuisance odour filters for AIR STEALTH half mask with Twin HEPAC* pleat encapsulated design filter provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above.
R329,69 incl VAT R247,26 incl VAT
Robert Sorby Bowl Gouge 1/2" Unhandled 18" Long South Africa

ROBERT SORBY BOWL GOUGE 1/2" UNHANDLED 18" LONG

TA-B842
1/2" Bowl Gouges the most popular size of bowl gouges. You can produce either massive profiling cuts or delicate finishing cuts as necessary.
Call for pricing
TREND 500 MM RULER DIGITAL ANGLE - SOUTH AFRICA

TREND 500 MM RULER DIGITAL ANGLE

TA-DR50
Digital angle rule with two 18-1/2 inch (1000 mm) stainless steel rules that can be used to calculate angles quickly and accurately and is ideal for woodworking, construction and machining. Digital display for angles. Stainless steel rule with metric/imperial scale, scale length 500 mm and 18-1/2 inch. Measuring range from 000.0 deg to 360.0 deg, with accuracy of 0.3 deg. Rule locking function. Easy operation with two press buttons. Auto-shut off in 6 minutes. Spare battery available ref. BAT/CR2032/3V. 1 x 3V CR2032 lithium battery
R1 100,00 incl VAT R825,00 incl VAT